AWS Native v0.126.0, Sep 30 24

We recommend new projects start with resources from the AWS provider.

AWS Native v0.126.0 published on Monday, Sep 30, 2024 by Pulumi

pulumi/pulumi-aws-native

aws-native.iotevents.getDetectorModel

Explore with Pulumi AI

We recommend new projects start with resources from the AWS provider.

AWS Native v0.126.0 published on Monday, Sep 30, 2024 by Pulumi

pulumi/pulumi-aws-native

The AWS::IoTEvents::DetectorModel resource creates a detector model. You create a detector model (a model of your equipment or process) using states. For each state, you define conditional (Boolean) logic that evaluates the incoming inputs to detect significant events. When an event is detected, it can change the state or trigger custom-built or predefined actions using other AWS services. You can define additional events that trigger actions when entering or exiting a state and, optionally, when a condition is met. For more information, see How to Use in the Developer Guide. When you successfully update a detector model (using the ITE console, ITE API or CLI commands, or CFN) all detector instances created by the model are reset to their initial states. (The detector’s state, and the values of any variables and timers are reset.) When you successfully update a detector model (using the ITE console, ITE API or CLI commands, or CFN) the version number of the detector model is incremented. (A detector model with version number 1 before the update has version number 2 after the update succeeds.) If you attempt to update a detector model using CFN and the update does not succeed, the system may, in some cases, restore the original detector model. When this occurs, the detector model’s version is incremented twice (for example, from version 1 to version 3) and the detector instances are reset. Also, be aware that if you attempt to update several detector models at once using CFN, some updates may succeed and others fail. In this case, the effects on each detector model’s detector instances and version number depend on whether the update succeeded or failed, with the results as stated.

Using getDetectorModel

Two invocation forms are available. The direct form accepts plain arguments and either blocks until the result value is available, or returns a Promise-wrapped result. The output form accepts Input-wrapped arguments and returns an Output-wrapped result.

function getDetectorModel(args: GetDetectorModelArgs, opts?: InvokeOptions): Promise<GetDetectorModelResult>
function getDetectorModelOutput(args: GetDetectorModelOutputArgs, opts?: InvokeOptions): Output<GetDetectorModelResult>

def get_detector_model(detector_model_name: Optional[str] = None,
                       opts: Optional[InvokeOptions] = None) -> GetDetectorModelResult
def get_detector_model_output(detector_model_name: Optional[pulumi.Input[str]] = None,
                       opts: Optional[InvokeOptions] = None) -> Output[GetDetectorModelResult]

func LookupDetectorModel(ctx *Context, args *LookupDetectorModelArgs, opts ...InvokeOption) (*LookupDetectorModelResult, error)
func LookupDetectorModelOutput(ctx *Context, args *LookupDetectorModelOutputArgs, opts ...InvokeOption) LookupDetectorModelResultOutput

> Note: This function is named LookupDetectorModel in the Go SDK.

public static class GetDetectorModel 
{
    public static Task<GetDetectorModelResult> InvokeAsync(GetDetectorModelArgs args, InvokeOptions? opts = null)
    public static Output<GetDetectorModelResult> Invoke(GetDetectorModelInvokeArgs args, InvokeOptions? opts = null)
}

public static CompletableFuture<GetDetectorModelResult> getDetectorModel(GetDetectorModelArgs args, InvokeOptions options)
// Output-based functions aren't available in Java yet

fn::invoke:
  function: aws-native:iotevents:getDetectorModel
  arguments:
    # arguments dictionary

The following arguments are supported:

DetectorModelName string: The name of the detector model.

DetectorModelName string: The name of the detector model.

detectorModelName String: The name of the detector model.

detectorModelName string: The name of the detector model.

detector_model_name str: The name of the detector model.

detectorModelName String: The name of the detector model.

getDetectorModel Result

The following output properties are available:

DetectorModelDefinition Pulumi.AwsNative.IoTEvents.Outputs.DetectorModelDefinition: Information that defines how a detector operates.
DetectorModelDescription string: A brief description of the detector model.
EvaluationMethod Pulumi.AwsNative.IoTEvents.DetectorModelEvaluationMethod: Information about the order in which events are evaluated and how actions are executed.
RoleArn string: The ARN of the role that grants permission to ITE to perform its operations.
Tags List<Pulumi.AwsNative.Outputs.Tag>: An array of key-value pairs to apply to this resource. For more information, see Tag.

DetectorModelDefinition DetectorModelDefinition: Information that defines how a detector operates.
DetectorModelDescription string: A brief description of the detector model.
EvaluationMethod DetectorModelEvaluationMethod: Information about the order in which events are evaluated and how actions are executed.
RoleArn string: The ARN of the role that grants permission to ITE to perform its operations.
Tags Tag: An array of key-value pairs to apply to this resource. For more information, see Tag.

detectorModelDefinition DetectorModelDefinition: Information that defines how a detector operates.
detectorModelDescription String: A brief description of the detector model.
evaluationMethod DetectorModelEvaluationMethod: Information about the order in which events are evaluated and how actions are executed.
roleArn String: The ARN of the role that grants permission to ITE to perform its operations.
tags List<Tag>: An array of key-value pairs to apply to this resource. For more information, see Tag.

detectorModelDefinition DetectorModelDefinition: Information that defines how a detector operates.
detectorModelDescription string: A brief description of the detector model.
evaluationMethod DetectorModelEvaluationMethod: Information about the order in which events are evaluated and how actions are executed.
roleArn string: The ARN of the role that grants permission to ITE to perform its operations.
tags Tag[]: An array of key-value pairs to apply to this resource. For more information, see Tag.

detector_model_definition DetectorModelDefinition: Information that defines how a detector operates.
detector_model_description str: A brief description of the detector model.
evaluation_method DetectorModelEvaluationMethod: Information about the order in which events are evaluated and how actions are executed.
role_arn str: The ARN of the role that grants permission to ITE to perform its operations.
tags Sequence[root_Tag]: An array of key-value pairs to apply to this resource. For more information, see Tag.

detectorModelDefinition Property Map: Information that defines how a detector operates.
detectorModelDescription String: A brief description of the detector model.
evaluationMethod "BATCH" | "SERIAL": Information about the order in which events are evaluated and how actions are executed.
roleArn String: The ARN of the role that grants permission to ITE to perform its operations.
tags List<Property Map>: An array of key-value pairs to apply to this resource. For more information, see Tag.

Supporting Types

DetectorModelAction

ClearTimer Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelClearTimer: Information needed to clear the timer.
DynamoDBv2 Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelDynamoDBv2: Writes to the DynamoDB table that you created. The default action payload contains all attribute-value pairs that have the information about the detector model instance and the event that triggered the action. You can customize the payload. A separate column of the DynamoDB table receives one attribute-value pair in the payload that you specify. For more information, see Actions in Developer Guide.
DynamoDb Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelDynamoDb: Writes to the DynamoDB table that you created. The default action payload contains all attribute-value pairs that have the information about the detector model instance and the event that triggered the action. You can customize the payload. One column of the DynamoDB table receives all attribute-value pairs in the payload that you specify. For more information, see Actions in Developer Guide.
Firehose Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelFirehose: Sends information about the detector model instance and the event that triggered the action to an Amazon Kinesis Data Firehose delivery stream.
IotEvents Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelIotEvents: Sends ITE input, which passes information about the detector model instance and the event that triggered the action.
IotSiteWise Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelIotSiteWise: Sends information about the detector model instance and the event that triggered the action to an asset property in ITSW .
IotTopicPublish Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelIotTopicPublish: Publishes an MQTT message with the given topic to the IoT message broker.
Lambda Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelLambda: Calls a Lambda function, passing in information about the detector model instance and the event that triggered the action.
ResetTimer Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelResetTimer: Information needed to reset the timer.
SetTimer Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelSetTimer: Information needed to set the timer.
SetVariable Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelSetVariable: Sets a variable to a specified value.
Sns Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelSns: Sends an Amazon SNS message.
Sqs Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelSqs: Sends an Amazon SNS message.

ClearTimer DetectorModelClearTimer: Information needed to clear the timer.
DynamoDBv2 DetectorModelDynamoDBv2: Writes to the DynamoDB table that you created. The default action payload contains all attribute-value pairs that have the information about the detector model instance and the event that triggered the action. You can customize the payload. A separate column of the DynamoDB table receives one attribute-value pair in the payload that you specify. For more information, see Actions in Developer Guide.
DynamoDb DetectorModelDynamoDb: Writes to the DynamoDB table that you created. The default action payload contains all attribute-value pairs that have the information about the detector model instance and the event that triggered the action. You can customize the payload. One column of the DynamoDB table receives all attribute-value pairs in the payload that you specify. For more information, see Actions in Developer Guide.
Firehose DetectorModelFirehose: Sends information about the detector model instance and the event that triggered the action to an Amazon Kinesis Data Firehose delivery stream.
IotEvents DetectorModelIotEvents: Sends ITE input, which passes information about the detector model instance and the event that triggered the action.
IotSiteWise DetectorModelIotSiteWise: Sends information about the detector model instance and the event that triggered the action to an asset property in ITSW .
IotTopicPublish DetectorModelIotTopicPublish: Publishes an MQTT message with the given topic to the IoT message broker.
Lambda DetectorModelLambda: Calls a Lambda function, passing in information about the detector model instance and the event that triggered the action.
ResetTimer DetectorModelResetTimer: Information needed to reset the timer.
SetTimer DetectorModelSetTimer: Information needed to set the timer.
SetVariable DetectorModelSetVariable: Sets a variable to a specified value.
Sns DetectorModelSns: Sends an Amazon SNS message.
Sqs DetectorModelSqs: Sends an Amazon SNS message.

clearTimer DetectorModelClearTimer: Information needed to clear the timer.
dynamoDBv2 DetectorModelDynamoDBv2: Writes to the DynamoDB table that you created. The default action payload contains all attribute-value pairs that have the information about the detector model instance and the event that triggered the action. You can customize the payload. A separate column of the DynamoDB table receives one attribute-value pair in the payload that you specify. For more information, see Actions in Developer Guide.
dynamoDb DetectorModelDynamoDb: Writes to the DynamoDB table that you created. The default action payload contains all attribute-value pairs that have the information about the detector model instance and the event that triggered the action. You can customize the payload. One column of the DynamoDB table receives all attribute-value pairs in the payload that you specify. For more information, see Actions in Developer Guide.
firehose DetectorModelFirehose: Sends information about the detector model instance and the event that triggered the action to an Amazon Kinesis Data Firehose delivery stream.
iotEvents DetectorModelIotEvents: Sends ITE input, which passes information about the detector model instance and the event that triggered the action.
iotSiteWise DetectorModelIotSiteWise: Sends information about the detector model instance and the event that triggered the action to an asset property in ITSW .
iotTopicPublish DetectorModelIotTopicPublish: Publishes an MQTT message with the given topic to the IoT message broker.
lambda DetectorModelLambda: Calls a Lambda function, passing in information about the detector model instance and the event that triggered the action.
resetTimer DetectorModelResetTimer: Information needed to reset the timer.
setTimer DetectorModelSetTimer: Information needed to set the timer.
setVariable DetectorModelSetVariable: Sets a variable to a specified value.
sns DetectorModelSns: Sends an Amazon SNS message.
sqs DetectorModelSqs: Sends an Amazon SNS message.

clearTimer DetectorModelClearTimer: Information needed to clear the timer.
dynamoDBv2 DetectorModelDynamoDBv2: Writes to the DynamoDB table that you created. The default action payload contains all attribute-value pairs that have the information about the detector model instance and the event that triggered the action. You can customize the payload. A separate column of the DynamoDB table receives one attribute-value pair in the payload that you specify. For more information, see Actions in Developer Guide.
dynamoDb DetectorModelDynamoDb: Writes to the DynamoDB table that you created. The default action payload contains all attribute-value pairs that have the information about the detector model instance and the event that triggered the action. You can customize the payload. One column of the DynamoDB table receives all attribute-value pairs in the payload that you specify. For more information, see Actions in Developer Guide.
firehose DetectorModelFirehose: Sends information about the detector model instance and the event that triggered the action to an Amazon Kinesis Data Firehose delivery stream.
iotEvents DetectorModelIotEvents: Sends ITE input, which passes information about the detector model instance and the event that triggered the action.
iotSiteWise DetectorModelIotSiteWise: Sends information about the detector model instance and the event that triggered the action to an asset property in ITSW .
iotTopicPublish DetectorModelIotTopicPublish: Publishes an MQTT message with the given topic to the IoT message broker.
lambda DetectorModelLambda: Calls a Lambda function, passing in information about the detector model instance and the event that triggered the action.
resetTimer DetectorModelResetTimer: Information needed to reset the timer.
setTimer DetectorModelSetTimer: Information needed to set the timer.
setVariable DetectorModelSetVariable: Sets a variable to a specified value.
sns DetectorModelSns: Sends an Amazon SNS message.
sqs DetectorModelSqs: Sends an Amazon SNS message.

clear_timer DetectorModelClearTimer: Information needed to clear the timer.
dynamo_d_bv2 DetectorModelDynamoDBv2: Writes to the DynamoDB table that you created. The default action payload contains all attribute-value pairs that have the information about the detector model instance and the event that triggered the action. You can customize the payload. A separate column of the DynamoDB table receives one attribute-value pair in the payload that you specify. For more information, see Actions in Developer Guide.
dynamo_db DetectorModelDynamoDb: Writes to the DynamoDB table that you created. The default action payload contains all attribute-value pairs that have the information about the detector model instance and the event that triggered the action. You can customize the payload. One column of the DynamoDB table receives all attribute-value pairs in the payload that you specify. For more information, see Actions in Developer Guide.
firehose DetectorModelFirehose: Sends information about the detector model instance and the event that triggered the action to an Amazon Kinesis Data Firehose delivery stream.
iot_events DetectorModelIotEvents: Sends ITE input, which passes information about the detector model instance and the event that triggered the action.
iot_site_wise DetectorModelIotSiteWise: Sends information about the detector model instance and the event that triggered the action to an asset property in ITSW .
iot_topic_publish DetectorModelIotTopicPublish: Publishes an MQTT message with the given topic to the IoT message broker.
lambda_ DetectorModelLambda: Calls a Lambda function, passing in information about the detector model instance and the event that triggered the action.
reset_timer DetectorModelResetTimer: Information needed to reset the timer.
set_timer DetectorModelSetTimer: Information needed to set the timer.
set_variable DetectorModelSetVariable: Sets a variable to a specified value.
sns DetectorModelSns: Sends an Amazon SNS message.
sqs DetectorModelSqs: Sends an Amazon SNS message.

clearTimer Property Map: Information needed to clear the timer.
dynamoDBv2 Property Map: Writes to the DynamoDB table that you created. The default action payload contains all attribute-value pairs that have the information about the detector model instance and the event that triggered the action. You can customize the payload. A separate column of the DynamoDB table receives one attribute-value pair in the payload that you specify. For more information, see Actions in Developer Guide.
dynamoDb Property Map: Writes to the DynamoDB table that you created. The default action payload contains all attribute-value pairs that have the information about the detector model instance and the event that triggered the action. You can customize the payload. One column of the DynamoDB table receives all attribute-value pairs in the payload that you specify. For more information, see Actions in Developer Guide.
firehose Property Map: Sends information about the detector model instance and the event that triggered the action to an Amazon Kinesis Data Firehose delivery stream.
iotEvents Property Map: Sends ITE input, which passes information about the detector model instance and the event that triggered the action.
iotSiteWise Property Map: Sends information about the detector model instance and the event that triggered the action to an asset property in ITSW .
iotTopicPublish Property Map: Publishes an MQTT message with the given topic to the IoT message broker.
lambda Property Map: Calls a Lambda function, passing in information about the detector model instance and the event that triggered the action.
resetTimer Property Map: Information needed to reset the timer.
setTimer Property Map: Information needed to set the timer.
setVariable Property Map: Sets a variable to a specified value.
sns Property Map: Sends an Amazon SNS message.
sqs Property Map: Sends an Amazon SNS message.

DetectorModelAssetPropertyTimestamp

TimeInSeconds string: The timestamp, in seconds, in the Unix epoch format. The valid range is between 1-31556889864403199.
OffsetInNanos string: The nanosecond offset converted from timeInSeconds. The valid range is between 0-999999999.

TimeInSeconds string: The timestamp, in seconds, in the Unix epoch format. The valid range is between 1-31556889864403199.
OffsetInNanos string: The nanosecond offset converted from timeInSeconds. The valid range is between 0-999999999.

timeInSeconds String: The timestamp, in seconds, in the Unix epoch format. The valid range is between 1-31556889864403199.
offsetInNanos String: The nanosecond offset converted from timeInSeconds. The valid range is between 0-999999999.

timeInSeconds string: The timestamp, in seconds, in the Unix epoch format. The valid range is between 1-31556889864403199.
offsetInNanos string: The nanosecond offset converted from timeInSeconds. The valid range is between 0-999999999.

time_in_seconds str: The timestamp, in seconds, in the Unix epoch format. The valid range is between 1-31556889864403199.
offset_in_nanos str: The nanosecond offset converted from timeInSeconds. The valid range is between 0-999999999.

timeInSeconds String: The timestamp, in seconds, in the Unix epoch format. The valid range is between 1-31556889864403199.
offsetInNanos String: The nanosecond offset converted from timeInSeconds. The valid range is between 0-999999999.

DetectorModelAssetPropertyValue

Value Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelAssetPropertyVariant: The value to send to an asset property.
Quality string: The quality of the asset property value. The value must be 'GOOD', 'BAD', or 'UNCERTAIN'.
Timestamp Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelAssetPropertyTimestamp: The timestamp associated with the asset property value. The default is the current event time.

Value DetectorModelAssetPropertyVariant: The value to send to an asset property.
Quality string: The quality of the asset property value. The value must be 'GOOD', 'BAD', or 'UNCERTAIN'.
Timestamp DetectorModelAssetPropertyTimestamp: The timestamp associated with the asset property value. The default is the current event time.

value DetectorModelAssetPropertyVariant: The value to send to an asset property.
quality String: The quality of the asset property value. The value must be 'GOOD', 'BAD', or 'UNCERTAIN'.
timestamp DetectorModelAssetPropertyTimestamp: The timestamp associated with the asset property value. The default is the current event time.

value DetectorModelAssetPropertyVariant: The value to send to an asset property.
quality string: The quality of the asset property value. The value must be 'GOOD', 'BAD', or 'UNCERTAIN'.
timestamp DetectorModelAssetPropertyTimestamp: The timestamp associated with the asset property value. The default is the current event time.

value DetectorModelAssetPropertyVariant: The value to send to an asset property.
quality str: The quality of the asset property value. The value must be 'GOOD', 'BAD', or 'UNCERTAIN'.
timestamp DetectorModelAssetPropertyTimestamp: The timestamp associated with the asset property value. The default is the current event time.

value Property Map: The value to send to an asset property.
quality String: The quality of the asset property value. The value must be 'GOOD', 'BAD', or 'UNCERTAIN'.
timestamp Property Map: The timestamp associated with the asset property value. The default is the current event time.

DetectorModelAssetPropertyVariant

BooleanValue string: The asset property value is a Boolean value that must be 'TRUE' or 'FALSE'. You must use an expression, and the evaluated result should be a Boolean value.
DoubleValue string: The asset property value is a double. You must use an expression, and the evaluated result should be a double.
IntegerValue string: The asset property value is an integer. You must use an expression, and the evaluated result should be an integer.
StringValue string: The asset property value is a string. You must use an expression, and the evaluated result should be a string.

BooleanValue string: The asset property value is a Boolean value that must be 'TRUE' or 'FALSE'. You must use an expression, and the evaluated result should be a Boolean value.
DoubleValue string: The asset property value is a double. You must use an expression, and the evaluated result should be a double.
IntegerValue string: The asset property value is an integer. You must use an expression, and the evaluated result should be an integer.
StringValue string: The asset property value is a string. You must use an expression, and the evaluated result should be a string.

booleanValue String: The asset property value is a Boolean value that must be 'TRUE' or 'FALSE'. You must use an expression, and the evaluated result should be a Boolean value.
doubleValue String: The asset property value is a double. You must use an expression, and the evaluated result should be a double.
integerValue String: The asset property value is an integer. You must use an expression, and the evaluated result should be an integer.
stringValue String: The asset property value is a string. You must use an expression, and the evaluated result should be a string.

booleanValue string: The asset property value is a Boolean value that must be 'TRUE' or 'FALSE'. You must use an expression, and the evaluated result should be a Boolean value.
doubleValue string: The asset property value is a double. You must use an expression, and the evaluated result should be a double.
integerValue string: The asset property value is an integer. You must use an expression, and the evaluated result should be an integer.
stringValue string: The asset property value is a string. You must use an expression, and the evaluated result should be a string.

boolean_value str: The asset property value is a Boolean value that must be 'TRUE' or 'FALSE'. You must use an expression, and the evaluated result should be a Boolean value.
double_value str: The asset property value is a double. You must use an expression, and the evaluated result should be a double.
integer_value str: The asset property value is an integer. You must use an expression, and the evaluated result should be an integer.
string_value str: The asset property value is a string. You must use an expression, and the evaluated result should be a string.

booleanValue String: The asset property value is a Boolean value that must be 'TRUE' or 'FALSE'. You must use an expression, and the evaluated result should be a Boolean value.
doubleValue String: The asset property value is a double. You must use an expression, and the evaluated result should be a double.
integerValue String: The asset property value is an integer. You must use an expression, and the evaluated result should be an integer.
stringValue String: The asset property value is a string. You must use an expression, and the evaluated result should be a string.

DetectorModelClearTimer

TimerName string: The name of the timer to clear.

TimerName string: The name of the timer to clear.

timerName String: The name of the timer to clear.

timerName string: The name of the timer to clear.

timer_name str: The name of the timer to clear.

timerName String: The name of the timer to clear.

DetectorModelDefinition

InitialStateName string: The state that is entered at the creation of each detector (instance).
States List<Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelState>: Information about the states of the detector.

InitialStateName string: The state that is entered at the creation of each detector (instance).
States []DetectorModelStateType: Information about the states of the detector.

initialStateName String: The state that is entered at the creation of each detector (instance).
states List<DetectorModelState>: Information about the states of the detector.

initialStateName string: The state that is entered at the creation of each detector (instance).
states DetectorModelState[]: Information about the states of the detector.

initial_state_name str: The state that is entered at the creation of each detector (instance).
states Sequence[DetectorModelState]: Information about the states of the detector.

initialStateName String: The state that is entered at the creation of each detector (instance).
states List<Property Map>: Information about the states of the detector.

DetectorModelDynamoDBv2

TableName string: The name of the DynamoDB table.
Payload Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelPayload: Information needed to configure the payload. By default, ITE generates a standard payload in JSON for any action. This action payload contains all attribute-value pairs that have the information about the detector model instance and the event triggered the action. To configure the action payload, you can use contentExpression.

TableName string: The name of the DynamoDB table.
Payload DetectorModelPayload: Information needed to configure the payload. By default, ITE generates a standard payload in JSON for any action. This action payload contains all attribute-value pairs that have the information about the detector model instance and the event triggered the action. To configure the action payload, you can use contentExpression.

tableName String: The name of the DynamoDB table.
payload DetectorModelPayload: Information needed to configure the payload. By default, ITE generates a standard payload in JSON for any action. This action payload contains all attribute-value pairs that have the information about the detector model instance and the event triggered the action. To configure the action payload, you can use contentExpression.

tableName string: The name of the DynamoDB table.
payload DetectorModelPayload: Information needed to configure the payload. By default, ITE generates a standard payload in JSON for any action. This action payload contains all attribute-value pairs that have the information about the detector model instance and the event triggered the action. To configure the action payload, you can use contentExpression.

table_name str: The name of the DynamoDB table.
payload DetectorModelPayload: Information needed to configure the payload. By default, ITE generates a standard payload in JSON for any action. This action payload contains all attribute-value pairs that have the information about the detector model instance and the event triggered the action. To configure the action payload, you can use contentExpression.

tableName String: The name of the DynamoDB table.
payload Property Map: Information needed to configure the payload. By default, ITE generates a standard payload in JSON for any action. This action payload contains all attribute-value pairs that have the information about the detector model instance and the event triggered the action. To configure the action payload, you can use contentExpression.

DetectorModelDynamoDb

HashKeyField string

The name of the hash key (also called the partition key). The hashKeyField value must match the partition key of the target DynamoDB table.

HashKeyValue string

The value of the hash key (also called the partition key).

TableName string

The name of the DynamoDB table. The tableName value must match the table name of the target DynamoDB table.

HashKeyType string

The data type for the hash key (also called the partition key). You can specify the following values:

'STRING' - The hash key is a string.
'NUMBER' - The hash key is a number.

If you don't specify hashKeyType, the default value is 'STRING'.

Operation string

The type of operation to perform. You can specify the following values:

'INSERT' - Insert data as a new item into the DynamoDB table. This item uses the specified hash key as a partition key. If you specified a range key, the item uses the range key as a sort key.
'UPDATE' - Update an existing item of the DynamoDB table with new data. This item's partition key must match the specified hash key. If you specified a range key, the range key must match the item's sort key.
'DELETE' - Delete an existing item of the DynamoDB table. This item's partition key must match the specified hash key. If you specified a range key, the range key must match the item's sort key.

If you don't specify this parameter, ITE triggers the 'INSERT' operation.

Payload Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelPayload

Information needed to configure the payload. By default, ITE generates a standard payload in JSON for any action. This action payload contains all attribute-value pairs that have the information about the detector model instance and the event triggered the action. To configure the action payload, you can use contentExpression.

PayloadField string

The name of the DynamoDB column that receives the action payload. If you don't specify this parameter, the name of the DynamoDB column is payload.

RangeKeyField string

The name of the range key (also called the sort key). The rangeKeyField value must match the sort key of the target DynamoDB table.

RangeKeyType string

The data type for the range key (also called the sort key), You can specify the following values:

'STRING' - The range key is a string.
'NUMBER' - The range key is number.

If you don't specify rangeKeyField, the default value is 'STRING'.

RangeKeyValue string

The value of the range key (also called the sort key).

HashKeyField string

The name of the hash key (also called the partition key). The hashKeyField value must match the partition key of the target DynamoDB table.

HashKeyValue string

The value of the hash key (also called the partition key).

TableName string

The name of the DynamoDB table. The tableName value must match the table name of the target DynamoDB table.

HashKeyType string

The data type for the hash key (also called the partition key). You can specify the following values:

'STRING' - The hash key is a string.
'NUMBER' - The hash key is a number.

If you don't specify hashKeyType, the default value is 'STRING'.

Operation string

The type of operation to perform. You can specify the following values:

'INSERT' - Insert data as a new item into the DynamoDB table. This item uses the specified hash key as a partition key. If you specified a range key, the item uses the range key as a sort key.
'UPDATE' - Update an existing item of the DynamoDB table with new data. This item's partition key must match the specified hash key. If you specified a range key, the range key must match the item's sort key.
'DELETE' - Delete an existing item of the DynamoDB table. This item's partition key must match the specified hash key. If you specified a range key, the range key must match the item's sort key.

If you don't specify this parameter, ITE triggers the 'INSERT' operation.

Payload DetectorModelPayload

PayloadField string

The name of the DynamoDB column that receives the action payload. If you don't specify this parameter, the name of the DynamoDB column is payload.

RangeKeyField string

The name of the range key (also called the sort key). The rangeKeyField value must match the sort key of the target DynamoDB table.

RangeKeyType string

The data type for the range key (also called the sort key), You can specify the following values:

'STRING' - The range key is a string.
'NUMBER' - The range key is number.

If you don't specify rangeKeyField, the default value is 'STRING'.

RangeKeyValue string

The value of the range key (also called the sort key).

hashKeyField String

The name of the hash key (also called the partition key). The hashKeyField value must match the partition key of the target DynamoDB table.

hashKeyValue String

The value of the hash key (also called the partition key).

tableName String

The name of the DynamoDB table. The tableName value must match the table name of the target DynamoDB table.

hashKeyType String

The data type for the hash key (also called the partition key). You can specify the following values:

'STRING' - The hash key is a string.
'NUMBER' - The hash key is a number.

If you don't specify hashKeyType, the default value is 'STRING'.

operation String

The type of operation to perform. You can specify the following values:

'INSERT' - Insert data as a new item into the DynamoDB table. This item uses the specified hash key as a partition key. If you specified a range key, the item uses the range key as a sort key.
'UPDATE' - Update an existing item of the DynamoDB table with new data. This item's partition key must match the specified hash key. If you specified a range key, the range key must match the item's sort key.
'DELETE' - Delete an existing item of the DynamoDB table. This item's partition key must match the specified hash key. If you specified a range key, the range key must match the item's sort key.

If you don't specify this parameter, ITE triggers the 'INSERT' operation.

payload DetectorModelPayload

payloadField String

The name of the DynamoDB column that receives the action payload. If you don't specify this parameter, the name of the DynamoDB column is payload.

rangeKeyField String

The name of the range key (also called the sort key). The rangeKeyField value must match the sort key of the target DynamoDB table.

rangeKeyType String

The data type for the range key (also called the sort key), You can specify the following values:

'STRING' - The range key is a string.
'NUMBER' - The range key is number.

If you don't specify rangeKeyField, the default value is 'STRING'.

rangeKeyValue String

The value of the range key (also called the sort key).

hashKeyField string

The name of the hash key (also called the partition key). The hashKeyField value must match the partition key of the target DynamoDB table.

hashKeyValue string

The value of the hash key (also called the partition key).

tableName string

The name of the DynamoDB table. The tableName value must match the table name of the target DynamoDB table.

hashKeyType string

The data type for the hash key (also called the partition key). You can specify the following values:

'STRING' - The hash key is a string.
'NUMBER' - The hash key is a number.

If you don't specify hashKeyType, the default value is 'STRING'.

operation string

The type of operation to perform. You can specify the following values:

'INSERT' - Insert data as a new item into the DynamoDB table. This item uses the specified hash key as a partition key. If you specified a range key, the item uses the range key as a sort key.
'UPDATE' - Update an existing item of the DynamoDB table with new data. This item's partition key must match the specified hash key. If you specified a range key, the range key must match the item's sort key.
'DELETE' - Delete an existing item of the DynamoDB table. This item's partition key must match the specified hash key. If you specified a range key, the range key must match the item's sort key.

If you don't specify this parameter, ITE triggers the 'INSERT' operation.

payload DetectorModelPayload

payloadField string

The name of the DynamoDB column that receives the action payload. If you don't specify this parameter, the name of the DynamoDB column is payload.

rangeKeyField string

The name of the range key (also called the sort key). The rangeKeyField value must match the sort key of the target DynamoDB table.

rangeKeyType string

The data type for the range key (also called the sort key), You can specify the following values:

'STRING' - The range key is a string.
'NUMBER' - The range key is number.

If you don't specify rangeKeyField, the default value is 'STRING'.

rangeKeyValue string

The value of the range key (also called the sort key).

hash_key_field str

The name of the hash key (also called the partition key). The hashKeyField value must match the partition key of the target DynamoDB table.

hash_key_value str

The value of the hash key (also called the partition key).

table_name str

The name of the DynamoDB table. The tableName value must match the table name of the target DynamoDB table.

hash_key_type str

The data type for the hash key (also called the partition key). You can specify the following values:

'STRING' - The hash key is a string.
'NUMBER' - The hash key is a number.

If you don't specify hashKeyType, the default value is 'STRING'.

operation str

The type of operation to perform. You can specify the following values:

'INSERT' - Insert data as a new item into the DynamoDB table. This item uses the specified hash key as a partition key. If you specified a range key, the item uses the range key as a sort key.
'UPDATE' - Update an existing item of the DynamoDB table with new data. This item's partition key must match the specified hash key. If you specified a range key, the range key must match the item's sort key.
'DELETE' - Delete an existing item of the DynamoDB table. This item's partition key must match the specified hash key. If you specified a range key, the range key must match the item's sort key.

If you don't specify this parameter, ITE triggers the 'INSERT' operation.

payload DetectorModelPayload

payload_field str

The name of the DynamoDB column that receives the action payload. If you don't specify this parameter, the name of the DynamoDB column is payload.

range_key_field str

The name of the range key (also called the sort key). The rangeKeyField value must match the sort key of the target DynamoDB table.

range_key_type str

The data type for the range key (also called the sort key), You can specify the following values:

'STRING' - The range key is a string.
'NUMBER' - The range key is number.

If you don't specify rangeKeyField, the default value is 'STRING'.

range_key_value str

The value of the range key (also called the sort key).

hashKeyField String

The name of the hash key (also called the partition key). The hashKeyField value must match the partition key of the target DynamoDB table.

hashKeyValue String

The value of the hash key (also called the partition key).

tableName String

The name of the DynamoDB table. The tableName value must match the table name of the target DynamoDB table.

hashKeyType String

The data type for the hash key (also called the partition key). You can specify the following values:

'STRING' - The hash key is a string.
'NUMBER' - The hash key is a number.

If you don't specify hashKeyType, the default value is 'STRING'.

operation String

The type of operation to perform. You can specify the following values:

'INSERT' - Insert data as a new item into the DynamoDB table. This item uses the specified hash key as a partition key. If you specified a range key, the item uses the range key as a sort key.
'UPDATE' - Update an existing item of the DynamoDB table with new data. This item's partition key must match the specified hash key. If you specified a range key, the range key must match the item's sort key.
'DELETE' - Delete an existing item of the DynamoDB table. This item's partition key must match the specified hash key. If you specified a range key, the range key must match the item's sort key.

If you don't specify this parameter, ITE triggers the 'INSERT' operation.

payload Property Map

payloadField String

The name of the DynamoDB column that receives the action payload. If you don't specify this parameter, the name of the DynamoDB column is payload.

rangeKeyField String

The name of the range key (also called the sort key). The rangeKeyField value must match the sort key of the target DynamoDB table.

rangeKeyType String

The data type for the range key (also called the sort key), You can specify the following values:

'STRING' - The range key is a string.
'NUMBER' - The range key is number.

If you don't specify rangeKeyField, the default value is 'STRING'.

rangeKeyValue String

The value of the range key (also called the sort key).

DetectorModelEvaluationMethod

DetectorModelEvent

EventName string: The name of the event.
Actions List<Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelAction>: The actions to be performed.
Condition string: Optional. The Boolean expression that, when TRUE, causes the actions to be performed. If not present, the actions are performed (=TRUE). If the expression result is not a Boolean value, the actions are not performed (=FALSE).

EventName string: The name of the event.
Actions []DetectorModelAction: The actions to be performed.
Condition string: Optional. The Boolean expression that, when TRUE, causes the actions to be performed. If not present, the actions are performed (=TRUE). If the expression result is not a Boolean value, the actions are not performed (=FALSE).

eventName String: The name of the event.
actions List<DetectorModelAction>: The actions to be performed.
condition String: Optional. The Boolean expression that, when TRUE, causes the actions to be performed. If not present, the actions are performed (=TRUE). If the expression result is not a Boolean value, the actions are not performed (=FALSE).

eventName string: The name of the event.
actions DetectorModelAction[]: The actions to be performed.
condition string: Optional. The Boolean expression that, when TRUE, causes the actions to be performed. If not present, the actions are performed (=TRUE). If the expression result is not a Boolean value, the actions are not performed (=FALSE).

event_name str: The name of the event.
actions Sequence[DetectorModelAction]: The actions to be performed.
condition str: Optional. The Boolean expression that, when TRUE, causes the actions to be performed. If not present, the actions are performed (=TRUE). If the expression result is not a Boolean value, the actions are not performed (=FALSE).

eventName String: The name of the event.
actions List<Property Map>: The actions to be performed.
condition String: Optional. The Boolean expression that, when TRUE, causes the actions to be performed. If not present, the actions are performed (=TRUE). If the expression result is not a Boolean value, the actions are not performed (=FALSE).

DetectorModelFirehose

DeliveryStreamName string: The name of the Kinesis Data Firehose delivery stream where the data is written.
Payload Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelPayload: You can configure the action payload when you send a message to an Amazon Data Firehose delivery stream.
Separator string: A character separator that is used to separate records written to the Kinesis Data Firehose delivery stream. Valid values are: '\n' (newline), '\t' (tab), '\r\n' (Windows newline), ',' (comma).

DeliveryStreamName string: The name of the Kinesis Data Firehose delivery stream where the data is written.
Payload DetectorModelPayload: You can configure the action payload when you send a message to an Amazon Data Firehose delivery stream.
Separator string: A character separator that is used to separate records written to the Kinesis Data Firehose delivery stream. Valid values are: '\n' (newline), '\t' (tab), '\r\n' (Windows newline), ',' (comma).

deliveryStreamName String: The name of the Kinesis Data Firehose delivery stream where the data is written.
payload DetectorModelPayload: You can configure the action payload when you send a message to an Amazon Data Firehose delivery stream.
separator String: A character separator that is used to separate records written to the Kinesis Data Firehose delivery stream. Valid values are: '\n' (newline), '\t' (tab), '\r\n' (Windows newline), ',' (comma).

deliveryStreamName string: The name of the Kinesis Data Firehose delivery stream where the data is written.
payload DetectorModelPayload: You can configure the action payload when you send a message to an Amazon Data Firehose delivery stream.
separator string: A character separator that is used to separate records written to the Kinesis Data Firehose delivery stream. Valid values are: '\n' (newline), '\t' (tab), '\r\n' (Windows newline), ',' (comma).

delivery_stream_name str: The name of the Kinesis Data Firehose delivery stream where the data is written.
payload DetectorModelPayload: You can configure the action payload when you send a message to an Amazon Data Firehose delivery stream.
separator str: A character separator that is used to separate records written to the Kinesis Data Firehose delivery stream. Valid values are: '\n' (newline), '\t' (tab), '\r\n' (Windows newline), ',' (comma).

deliveryStreamName String: The name of the Kinesis Data Firehose delivery stream where the data is written.
payload Property Map: You can configure the action payload when you send a message to an Amazon Data Firehose delivery stream.
separator String: A character separator that is used to separate records written to the Kinesis Data Firehose delivery stream. Valid values are: '\n' (newline), '\t' (tab), '\r\n' (Windows newline), ',' (comma).

DetectorModelIotEvents

InputName string: The name of the ITE input where the data is sent.
Payload Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelPayload: You can configure the action payload when you send a message to an ITE input.

InputName string: The name of the ITE input where the data is sent.
Payload DetectorModelPayload: You can configure the action payload when you send a message to an ITE input.

inputName String: The name of the ITE input where the data is sent.
payload DetectorModelPayload: You can configure the action payload when you send a message to an ITE input.

inputName string: The name of the ITE input where the data is sent.
payload DetectorModelPayload: You can configure the action payload when you send a message to an ITE input.

input_name str: The name of the ITE input where the data is sent.
payload DetectorModelPayload: You can configure the action payload when you send a message to an ITE input.

inputName String: The name of the ITE input where the data is sent.
payload Property Map: You can configure the action payload when you send a message to an ITE input.

DetectorModelIotSiteWise

PropertyValue Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelAssetPropertyValue: The value to send to the asset property. This value contains timestamp, quality, and value (TQV) information.
AssetId string: The ID of the asset that has the specified property.
EntryId string: A unique identifier for this entry. You can use the entry ID to track which data entry causes an error in case of failure. The default is a new unique identifier.
PropertyAlias string: The alias of the asset property.
PropertyId string: The ID of the asset property.

PropertyValue DetectorModelAssetPropertyValue: The value to send to the asset property. This value contains timestamp, quality, and value (TQV) information.
AssetId string: The ID of the asset that has the specified property.
EntryId string: A unique identifier for this entry. You can use the entry ID to track which data entry causes an error in case of failure. The default is a new unique identifier.
PropertyAlias string: The alias of the asset property.
PropertyId string: The ID of the asset property.

propertyValue DetectorModelAssetPropertyValue: The value to send to the asset property. This value contains timestamp, quality, and value (TQV) information.
assetId String: The ID of the asset that has the specified property.
entryId String: A unique identifier for this entry. You can use the entry ID to track which data entry causes an error in case of failure. The default is a new unique identifier.
propertyAlias String: The alias of the asset property.
propertyId String: The ID of the asset property.

propertyValue DetectorModelAssetPropertyValue: The value to send to the asset property. This value contains timestamp, quality, and value (TQV) information.
assetId string: The ID of the asset that has the specified property.
entryId string: A unique identifier for this entry. You can use the entry ID to track which data entry causes an error in case of failure. The default is a new unique identifier.
propertyAlias string: The alias of the asset property.
propertyId string: The ID of the asset property.

property_value DetectorModelAssetPropertyValue: The value to send to the asset property. This value contains timestamp, quality, and value (TQV) information.
asset_id str: The ID of the asset that has the specified property.
entry_id str: A unique identifier for this entry. You can use the entry ID to track which data entry causes an error in case of failure. The default is a new unique identifier.
property_alias str: The alias of the asset property.
property_id str: The ID of the asset property.

propertyValue Property Map: The value to send to the asset property. This value contains timestamp, quality, and value (TQV) information.
assetId String: The ID of the asset that has the specified property.
entryId String: A unique identifier for this entry. You can use the entry ID to track which data entry causes an error in case of failure. The default is a new unique identifier.
propertyAlias String: The alias of the asset property.
propertyId String: The ID of the asset property.

DetectorModelIotTopicPublish

MqttTopic string: The MQTT topic of the message. You can use a string expression that includes variables ($variable.<variable-name>) and input values ($input.<input-name>.<path-to-datum>) as the topic string.
Payload Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelPayload: You can configure the action payload when you publish a message to an IoTCore topic.

MqttTopic string: The MQTT topic of the message. You can use a string expression that includes variables ($variable.<variable-name>) and input values ($input.<input-name>.<path-to-datum>) as the topic string.
Payload DetectorModelPayload: You can configure the action payload when you publish a message to an IoTCore topic.

mqttTopic String: The MQTT topic of the message. You can use a string expression that includes variables ($variable.<variable-name>) and input values ($input.<input-name>.<path-to-datum>) as the topic string.
payload DetectorModelPayload: You can configure the action payload when you publish a message to an IoTCore topic.

mqttTopic string: The MQTT topic of the message. You can use a string expression that includes variables ($variable.<variable-name>) and input values ($input.<input-name>.<path-to-datum>) as the topic string.
payload DetectorModelPayload: You can configure the action payload when you publish a message to an IoTCore topic.

mqtt_topic str: The MQTT topic of the message. You can use a string expression that includes variables ($variable.<variable-name>) and input values ($input.<input-name>.<path-to-datum>) as the topic string.
payload DetectorModelPayload: You can configure the action payload when you publish a message to an IoTCore topic.

mqttTopic String: The MQTT topic of the message. You can use a string expression that includes variables ($variable.<variable-name>) and input values ($input.<input-name>.<path-to-datum>) as the topic string.
payload Property Map: You can configure the action payload when you publish a message to an IoTCore topic.

DetectorModelLambda

FunctionArn string: The ARN of the Lambda function that is executed.
Payload Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelPayload: You can configure the action payload when you send a message to a Lambda function.

FunctionArn string: The ARN of the Lambda function that is executed.
Payload DetectorModelPayload: You can configure the action payload when you send a message to a Lambda function.

functionArn String: The ARN of the Lambda function that is executed.
payload DetectorModelPayload: You can configure the action payload when you send a message to a Lambda function.

functionArn string: The ARN of the Lambda function that is executed.
payload DetectorModelPayload: You can configure the action payload when you send a message to a Lambda function.

function_arn str: The ARN of the Lambda function that is executed.
payload DetectorModelPayload: You can configure the action payload when you send a message to a Lambda function.

functionArn String: The ARN of the Lambda function that is executed.
payload Property Map: You can configure the action payload when you send a message to a Lambda function.

DetectorModelOnEnter

Events List<Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelEvent>: Specifies the actions that are performed when the state is entered and the condition is TRUE.

Events []DetectorModelEvent: Specifies the actions that are performed when the state is entered and the condition is TRUE.

events List<DetectorModelEvent>: Specifies the actions that are performed when the state is entered and the condition is TRUE.

events DetectorModelEvent[]: Specifies the actions that are performed when the state is entered and the condition is TRUE.

events Sequence[DetectorModelEvent]: Specifies the actions that are performed when the state is entered and the condition is TRUE.

events List<Property Map>: Specifies the actions that are performed when the state is entered and the condition is TRUE.

DetectorModelOnExit

Events List<Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelEvent>: Specifies the actions that are performed when the state is exited and the condition is TRUE.

Events []DetectorModelEvent: Specifies the actions that are performed when the state is exited and the condition is TRUE.

events List<DetectorModelEvent>: Specifies the actions that are performed when the state is exited and the condition is TRUE.

events DetectorModelEvent[]: Specifies the actions that are performed when the state is exited and the condition is TRUE.

events Sequence[DetectorModelEvent]: Specifies the actions that are performed when the state is exited and the condition is TRUE.

events List<Property Map>: Specifies the actions that are performed when the state is exited and the condition is TRUE.

DetectorModelOnInput

Events List<Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelEvent>: Specifies the actions performed when the condition evaluates to TRUE.
TransitionEvents List<Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelTransitionEvent>: Specifies the actions performed, and the next state entered, when a condition evaluates to TRUE.

Events []DetectorModelEvent: Specifies the actions performed when the condition evaluates to TRUE.
TransitionEvents []DetectorModelTransitionEvent: Specifies the actions performed, and the next state entered, when a condition evaluates to TRUE.

events List<DetectorModelEvent>: Specifies the actions performed when the condition evaluates to TRUE.
transitionEvents List<DetectorModelTransitionEvent>: Specifies the actions performed, and the next state entered, when a condition evaluates to TRUE.

events DetectorModelEvent[]: Specifies the actions performed when the condition evaluates to TRUE.
transitionEvents DetectorModelTransitionEvent[]: Specifies the actions performed, and the next state entered, when a condition evaluates to TRUE.

events Sequence[DetectorModelEvent]: Specifies the actions performed when the condition evaluates to TRUE.
transition_events Sequence[DetectorModelTransitionEvent]: Specifies the actions performed, and the next state entered, when a condition evaluates to TRUE.

events List<Property Map>: Specifies the actions performed when the condition evaluates to TRUE.
transitionEvents List<Property Map>: Specifies the actions performed, and the next state entered, when a condition evaluates to TRUE.

DetectorModelPayload

ContentExpression string: The content of the payload. You can use a string expression that includes quoted strings ('<string>'), variables ($variable.<variable-name>), input values ($input.<input-name>.<path-to-datum>), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
Type string: The value of the payload type can be either STRING or JSON.

ContentExpression string: The content of the payload. You can use a string expression that includes quoted strings ('<string>'), variables ($variable.<variable-name>), input values ($input.<input-name>.<path-to-datum>), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
Type string: The value of the payload type can be either STRING or JSON.

contentExpression String: The content of the payload. You can use a string expression that includes quoted strings ('<string>'), variables ($variable.<variable-name>), input values ($input.<input-name>.<path-to-datum>), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
type String: The value of the payload type can be either STRING or JSON.

contentExpression string: The content of the payload. You can use a string expression that includes quoted strings ('<string>'), variables ($variable.<variable-name>), input values ($input.<input-name>.<path-to-datum>), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
type string: The value of the payload type can be either STRING or JSON.

content_expression str: The content of the payload. You can use a string expression that includes quoted strings ('<string>'), variables ($variable.<variable-name>), input values ($input.<input-name>.<path-to-datum>), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
type str: The value of the payload type can be either STRING or JSON.

contentExpression String: The content of the payload. You can use a string expression that includes quoted strings ('<string>'), variables ($variable.<variable-name>), input values ($input.<input-name>.<path-to-datum>), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
type String: The value of the payload type can be either STRING or JSON.

DetectorModelResetTimer

TimerName string: The name of the timer to reset.

TimerName string: The name of the timer to reset.

timerName String: The name of the timer to reset.

timerName string: The name of the timer to reset.

timer_name str: The name of the timer to reset.

timerName String: The name of the timer to reset.

DetectorModelSetTimer

TimerName string: The name of the timer.
DurationExpression string: The duration of the timer, in seconds. You can use a string expression that includes numbers, variables ($variable.<variable-name>), and input values ($input.<input-name>.<path-to-datum>) as the duration. The range of the duration is 1-31622400 seconds. To ensure accuracy, the minimum duration is 60 seconds. The evaluated result of the duration is rounded down to the nearest whole number.
Seconds int: The number of seconds until the timer expires. The minimum value is 60 seconds to ensure accuracy. The maximum value is 31622400 seconds.

TimerName string: The name of the timer.
DurationExpression string: The duration of the timer, in seconds. You can use a string expression that includes numbers, variables ($variable.<variable-name>), and input values ($input.<input-name>.<path-to-datum>) as the duration. The range of the duration is 1-31622400 seconds. To ensure accuracy, the minimum duration is 60 seconds. The evaluated result of the duration is rounded down to the nearest whole number.
Seconds int: The number of seconds until the timer expires. The minimum value is 60 seconds to ensure accuracy. The maximum value is 31622400 seconds.

timerName String: The name of the timer.
durationExpression String: The duration of the timer, in seconds. You can use a string expression that includes numbers, variables ($variable.<variable-name>), and input values ($input.<input-name>.<path-to-datum>) as the duration. The range of the duration is 1-31622400 seconds. To ensure accuracy, the minimum duration is 60 seconds. The evaluated result of the duration is rounded down to the nearest whole number.
seconds Integer: The number of seconds until the timer expires. The minimum value is 60 seconds to ensure accuracy. The maximum value is 31622400 seconds.

timerName string: The name of the timer.
durationExpression string: The duration of the timer, in seconds. You can use a string expression that includes numbers, variables ($variable.<variable-name>), and input values ($input.<input-name>.<path-to-datum>) as the duration. The range of the duration is 1-31622400 seconds. To ensure accuracy, the minimum duration is 60 seconds. The evaluated result of the duration is rounded down to the nearest whole number.
seconds number: The number of seconds until the timer expires. The minimum value is 60 seconds to ensure accuracy. The maximum value is 31622400 seconds.

timer_name str: The name of the timer.
duration_expression str: The duration of the timer, in seconds. You can use a string expression that includes numbers, variables ($variable.<variable-name>), and input values ($input.<input-name>.<path-to-datum>) as the duration. The range of the duration is 1-31622400 seconds. To ensure accuracy, the minimum duration is 60 seconds. The evaluated result of the duration is rounded down to the nearest whole number.
seconds int: The number of seconds until the timer expires. The minimum value is 60 seconds to ensure accuracy. The maximum value is 31622400 seconds.

timerName String: The name of the timer.
durationExpression String: The duration of the timer, in seconds. You can use a string expression that includes numbers, variables ($variable.<variable-name>), and input values ($input.<input-name>.<path-to-datum>) as the duration. The range of the duration is 1-31622400 seconds. To ensure accuracy, the minimum duration is 60 seconds. The evaluated result of the duration is rounded down to the nearest whole number.
seconds Number: The number of seconds until the timer expires. The minimum value is 60 seconds to ensure accuracy. The maximum value is 31622400 seconds.

DetectorModelSetVariable

Value string: The new value of the variable.
VariableName string: The name of the variable.

Value string: The new value of the variable.
VariableName string: The name of the variable.

value String: The new value of the variable.
variableName String: The name of the variable.

value string: The new value of the variable.
variableName string: The name of the variable.

value str: The new value of the variable.
variable_name str: The name of the variable.

value String: The new value of the variable.
variableName String: The name of the variable.

DetectorModelSns

TargetArn string: The ARN of the Amazon SNS target where the message is sent.
Payload Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelPayload: You can configure the action payload when you send a message as an Amazon SNS push notification.

TargetArn string: The ARN of the Amazon SNS target where the message is sent.
Payload DetectorModelPayload: You can configure the action payload when you send a message as an Amazon SNS push notification.

targetArn String: The ARN of the Amazon SNS target where the message is sent.
payload DetectorModelPayload: You can configure the action payload when you send a message as an Amazon SNS push notification.

targetArn string: The ARN of the Amazon SNS target where the message is sent.
payload DetectorModelPayload: You can configure the action payload when you send a message as an Amazon SNS push notification.

target_arn str: The ARN of the Amazon SNS target where the message is sent.
payload DetectorModelPayload: You can configure the action payload when you send a message as an Amazon SNS push notification.

targetArn String: The ARN of the Amazon SNS target where the message is sent.
payload Property Map: You can configure the action payload when you send a message as an Amazon SNS push notification.

DetectorModelSqs

QueueUrl string: The URL of the SQS queue where the data is written.
Payload Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelPayload: You can configure the action payload when you send a message to an Amazon SQS queue.
UseBase64 bool: Set this to TRUE if you want the data to be base-64 encoded before it is written to the queue. Otherwise, set this to FALSE.

QueueUrl string: The URL of the SQS queue where the data is written.
Payload DetectorModelPayload: You can configure the action payload when you send a message to an Amazon SQS queue.
UseBase64 bool: Set this to TRUE if you want the data to be base-64 encoded before it is written to the queue. Otherwise, set this to FALSE.

queueUrl String: The URL of the SQS queue where the data is written.
payload DetectorModelPayload: You can configure the action payload when you send a message to an Amazon SQS queue.
useBase64 Boolean: Set this to TRUE if you want the data to be base-64 encoded before it is written to the queue. Otherwise, set this to FALSE.

queueUrl string: The URL of the SQS queue where the data is written.
payload DetectorModelPayload: You can configure the action payload when you send a message to an Amazon SQS queue.
useBase64 boolean: Set this to TRUE if you want the data to be base-64 encoded before it is written to the queue. Otherwise, set this to FALSE.

queue_url str: The URL of the SQS queue where the data is written.
payload DetectorModelPayload: You can configure the action payload when you send a message to an Amazon SQS queue.
use_base64 bool: Set this to TRUE if you want the data to be base-64 encoded before it is written to the queue. Otherwise, set this to FALSE.

queueUrl String: The URL of the SQS queue where the data is written.
payload Property Map: You can configure the action payload when you send a message to an Amazon SQS queue.
useBase64 Boolean: Set this to TRUE if you want the data to be base-64 encoded before it is written to the queue. Otherwise, set this to FALSE.

DetectorModelState

StateName string: The name of the state.
OnEnter Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelOnEnter: When entering this state, perform these actions if the condition is TRUE.
OnExit Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelOnExit: When exiting this state, perform these actions if the specified condition is TRUE.
OnInput Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelOnInput: When an input is received and the condition is TRUE, perform the specified actions.

StateName string: The name of the state.
OnEnter DetectorModelOnEnter: When entering this state, perform these actions if the condition is TRUE.
OnExit DetectorModelOnExit: When exiting this state, perform these actions if the specified condition is TRUE.
OnInput DetectorModelOnInput: When an input is received and the condition is TRUE, perform the specified actions.

stateName String: The name of the state.
onEnter DetectorModelOnEnter: When entering this state, perform these actions if the condition is TRUE.
onExit DetectorModelOnExit: When exiting this state, perform these actions if the specified condition is TRUE.
onInput DetectorModelOnInput: When an input is received and the condition is TRUE, perform the specified actions.

stateName string: The name of the state.
onEnter DetectorModelOnEnter: When entering this state, perform these actions if the condition is TRUE.
onExit DetectorModelOnExit: When exiting this state, perform these actions if the specified condition is TRUE.
onInput DetectorModelOnInput: When an input is received and the condition is TRUE, perform the specified actions.

state_name str: The name of the state.
on_enter DetectorModelOnEnter: When entering this state, perform these actions if the condition is TRUE.
on_exit DetectorModelOnExit: When exiting this state, perform these actions if the specified condition is TRUE.
on_input DetectorModelOnInput: When an input is received and the condition is TRUE, perform the specified actions.

stateName String: The name of the state.
onEnter Property Map: When entering this state, perform these actions if the condition is TRUE.
onExit Property Map: When exiting this state, perform these actions if the specified condition is TRUE.
onInput Property Map: When an input is received and the condition is TRUE, perform the specified actions.

DetectorModelTransitionEvent

Condition string: Required. A Boolean expression that when TRUE causes the actions to be performed and the nextState to be entered.
EventName string: The name of the transition event.
NextState string: The next state to enter.
Actions List<Pulumi.AwsNative.IoTEvents.Inputs.DetectorModelAction>: The actions to be performed.

Condition string: Required. A Boolean expression that when TRUE causes the actions to be performed and the nextState to be entered.
EventName string: The name of the transition event.
NextState string: The next state to enter.
Actions []DetectorModelAction: The actions to be performed.

condition String: Required. A Boolean expression that when TRUE causes the actions to be performed and the nextState to be entered.
eventName String: The name of the transition event.
nextState String: The next state to enter.
actions List<DetectorModelAction>: The actions to be performed.

condition string: Required. A Boolean expression that when TRUE causes the actions to be performed and the nextState to be entered.
eventName string: The name of the transition event.
nextState string: The next state to enter.
actions DetectorModelAction[]: The actions to be performed.

condition str: Required. A Boolean expression that when TRUE causes the actions to be performed and the nextState to be entered.
event_name str: The name of the transition event.
next_state str: The next state to enter.
actions Sequence[DetectorModelAction]: The actions to be performed.

condition String: Required. A Boolean expression that when TRUE causes the actions to be performed and the nextState to be entered.
eventName String: The name of the transition event.
nextState String: The next state to enter.
actions List<Property Map>: The actions to be performed.

Package Details

Repository: AWS Native pulumi/pulumi-aws-native
License: Apache-2.0

We recommend new projects start with resources from the AWS provider.

AWS Native v0.126.0 published on Monday, Sep 30, 2024 by Pulumi

pulumi/pulumi-aws-native

aws-native.iotevents.getDetectorModel

On this page

On this page

Using getDetectorModel

getDetectorModel Result

Supporting Types

DetectorModelAction

DetectorModelAssetPropertyTimestamp

DetectorModelAssetPropertyValue

DetectorModelAssetPropertyVariant

DetectorModelClearTimer

DetectorModelDefinition

DetectorModelDynamoDBv2

DetectorModelDynamoDb

DetectorModelEvaluationMethod

DetectorModelEvent

DetectorModelFirehose

DetectorModelIotEvents

DetectorModelIotSiteWise

DetectorModelIotTopicPublish

DetectorModelLambda

DetectorModelOnEnter

DetectorModelOnExit

DetectorModelOnInput

DetectorModelPayload

DetectorModelResetTimer

DetectorModelSetTimer

DetectorModelSetVariable

DetectorModelSns

DetectorModelSqs

DetectorModelState

DetectorModelTransitionEvent

Tag

Package Details

On this page

On this page