Docs Home Pulumi IaC Pulumi ESC Pulumi Cloud Packages Tutorials
  1. Packages
  2. Fortios
  3. API Docs
  4. system
  5. system/snmp
  6. Community
Fortios v0.0.6 published on Tuesday, Jul 9, 2024 by pulumiverse
pulumiverse/pulumi-fortios

fortios.system/snmp.Community

Explore with Pulumi AI

fortios logo
Fortios v0.0.6 published on Tuesday, Jul 9, 2024 by pulumiverse
pulumiverse/pulumi-fortios

    SNMP community configuration.

    Example Usage

    import * as pulumi from "@pulumi/pulumi";
import * as fortios from "@pulumiverse/fortios";

const trname = new fortios.system.snmp.Community("trname", {
    events: "cpu-high mem-low log-full intf-ip vpn-tun-up vpn-tun-down ha-switch ha-hb-failure ips-signature ips-anomaly av-virus av-oversize av-pattern av-fragmented fm-if-change bgp-established bgp-backward-transition ha-member-up ha-member-down ent-conf-change av-conserve av-bypass av-oversize-passed av-oversize-blocked ips-pkg-update ips-fail-open faz-disconnect wc-ap-up wc-ap-down fswctl-session-up fswctl-session-down load-balance-real-server-down per-cpu-high",
    fosid: 1,
    queryV1Port: 161,
    queryV1Status: "enable",
    queryV2cPort: 161,
    queryV2cStatus: "enable",
    status: "enable",
    trapV1Lport: 162,
    trapV1Rport: 162,
    trapV1Status: "enable",
    trapV2cLport: 162,
    trapV2cRport: 162,
    trapV2cStatus: "enable",
});

    import pulumi
import pulumiverse_fortios as fortios

trname = fortios.system.snmp.Community("trname",
    events="cpu-high mem-low log-full intf-ip vpn-tun-up vpn-tun-down ha-switch ha-hb-failure ips-signature ips-anomaly av-virus av-oversize av-pattern av-fragmented fm-if-change bgp-established bgp-backward-transition ha-member-up ha-member-down ent-conf-change av-conserve av-bypass av-oversize-passed av-oversize-blocked ips-pkg-update ips-fail-open faz-disconnect wc-ap-up wc-ap-down fswctl-session-up fswctl-session-down load-balance-real-server-down per-cpu-high",
    fosid=1,
    query_v1_port=161,
    query_v1_status="enable",
    query_v2c_port=161,
    query_v2c_status="enable",
    status="enable",
    trap_v1_lport=162,
    trap_v1_rport=162,
    trap_v1_status="enable",
    trap_v2c_lport=162,
    trap_v2c_rport=162,
    trap_v2c_status="enable")

    package main

import (
	"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
	"github.com/pulumiverse/pulumi-fortios/sdk/go/fortios/system"
)

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := system.NewCommunity(ctx, "trname", &system.CommunityArgs{
			Events:         pulumi.String("cpu-high mem-low log-full intf-ip vpn-tun-up vpn-tun-down ha-switch ha-hb-failure ips-signature ips-anomaly av-virus av-oversize av-pattern av-fragmented fm-if-change bgp-established bgp-backward-transition ha-member-up ha-member-down ent-conf-change av-conserve av-bypass av-oversize-passed av-oversize-blocked ips-pkg-update ips-fail-open faz-disconnect wc-ap-up wc-ap-down fswctl-session-up fswctl-session-down load-balance-real-server-down per-cpu-high"),
			Fosid:          pulumi.Int(1),
			QueryV1Port:    pulumi.Int(161),
			QueryV1Status:  pulumi.String("enable"),
			QueryV2cPort:   pulumi.Int(161),
			QueryV2cStatus: pulumi.String("enable"),
			Status:         pulumi.String("enable"),
			TrapV1Lport:    pulumi.Int(162),
			TrapV1Rport:    pulumi.Int(162),
			TrapV1Status:   pulumi.String("enable"),
			TrapV2cLport:   pulumi.Int(162),
			TrapV2cRport:   pulumi.Int(162),
			TrapV2cStatus:  pulumi.String("enable"),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

    using System.Collections.Generic;
using System.Linq;
using Pulumi;
using Fortios = Pulumiverse.Fortios;

return await Deployment.RunAsync(() => 
{
    var trname = new Fortios.System.Snmp.Community("trname", new()
    {
        Events = "cpu-high mem-low log-full intf-ip vpn-tun-up vpn-tun-down ha-switch ha-hb-failure ips-signature ips-anomaly av-virus av-oversize av-pattern av-fragmented fm-if-change bgp-established bgp-backward-transition ha-member-up ha-member-down ent-conf-change av-conserve av-bypass av-oversize-passed av-oversize-blocked ips-pkg-update ips-fail-open faz-disconnect wc-ap-up wc-ap-down fswctl-session-up fswctl-session-down load-balance-real-server-down per-cpu-high",
        Fosid = 1,
        QueryV1Port = 161,
        QueryV1Status = "enable",
        QueryV2cPort = 161,
        QueryV2cStatus = "enable",
        Status = "enable",
        TrapV1Lport = 162,
        TrapV1Rport = 162,
        TrapV1Status = "enable",
        TrapV2cLport = 162,
        TrapV2cRport = 162,
        TrapV2cStatus = "enable",
    });

});

    package generated_program;

import com.pulumi.Context;
import com.pulumi.Pulumi;
import com.pulumi.core.Output;
import com.pulumi.fortios.system.Community;
import com.pulumi.fortios.system.CommunityArgs;
import java.util.List;
import java.util.ArrayList;
import java.util.Map;
import java.io.File;
import java.nio.file.Files;
import java.nio.file.Paths;

public class App {
    public static void main(String[] args) {
        Pulumi.run(App::stack);
    }

    public static void stack(Context ctx) {
        var trname = new Community("trname", CommunityArgs.builder()
            .events("cpu-high mem-low log-full intf-ip vpn-tun-up vpn-tun-down ha-switch ha-hb-failure ips-signature ips-anomaly av-virus av-oversize av-pattern av-fragmented fm-if-change bgp-established bgp-backward-transition ha-member-up ha-member-down ent-conf-change av-conserve av-bypass av-oversize-passed av-oversize-blocked ips-pkg-update ips-fail-open faz-disconnect wc-ap-up wc-ap-down fswctl-session-up fswctl-session-down load-balance-real-server-down per-cpu-high")
            .fosid(1)
            .queryV1Port(161)
            .queryV1Status("enable")
            .queryV2cPort(161)
            .queryV2cStatus("enable")
            .status("enable")
            .trapV1Lport(162)
            .trapV1Rport(162)
            .trapV1Status("enable")
            .trapV2cLport(162)
            .trapV2cRport(162)
            .trapV2cStatus("enable")
            .build());

    }
}

    resources:
  trname:
    type: fortios:system/snmp:Community
    properties:
      events: cpu-high mem-low log-full intf-ip vpn-tun-up vpn-tun-down ha-switch ha-hb-failure ips-signature ips-anomaly av-virus av-oversize av-pattern av-fragmented fm-if-change bgp-established bgp-backward-transition ha-member-up ha-member-down ent-conf-change av-conserve av-bypass av-oversize-passed av-oversize-blocked ips-pkg-update ips-fail-open faz-disconnect wc-ap-up wc-ap-down fswctl-session-up fswctl-session-down load-balance-real-server-down per-cpu-high
      fosid: 1
      queryV1Port: 161
      queryV1Status: enable
      queryV2cPort: 161
      queryV2cStatus: enable
      status: enable
      trapV1Lport: 162
      trapV1Rport: 162
      trapV1Status: enable
      trapV2cLport: 162
      trapV2cRport: 162
      trapV2cStatus: enable

    Create Community Resource

    Resources are created with functions called constructors. To learn more about declaring and configuring resources, see Resources.

    Constructor syntax

    new Community(name: string, args: CommunityArgs, opts?: CustomResourceOptions);
    @overload
def Community(resource_name: str,
              args: CommunityArgs,
              opts: Optional[ResourceOptions] = None)

@overload
def Community(resource_name: str,
              opts: Optional[ResourceOptions] = None,
              fosid: Optional[int] = None,
              query_v2c_port: Optional[int] = None,
              trap_v2c_status: Optional[str] = None,
              get_all_tables: Optional[str] = None,
              hosts: Optional[Sequence[CommunityHostArgs]] = None,
              hosts6s: Optional[Sequence[CommunityHosts6Args]] = None,
              mib_view: Optional[str] = None,
              name: Optional[str] = None,
              query_v2c_status: Optional[str] = None,
              vdoms: Optional[Sequence[CommunityVdomArgs]] = None,
              events: Optional[str] = None,
              query_v1_port: Optional[int] = None,
              status: Optional[str] = None,
              trap_v1_lport: Optional[int] = None,
              trap_v1_rport: Optional[int] = None,
              trap_v1_status: Optional[str] = None,
              trap_v2c_lport: Optional[int] = None,
              trap_v2c_rport: Optional[int] = None,
              dynamic_sort_subtable: Optional[str] = None,
              vdomparam: Optional[str] = None,
              query_v1_status: Optional[str] = None)
    func NewCommunity(ctx *Context, name string, args CommunityArgs, opts ...ResourceOption) (*Community, error)
    public Community(string name, CommunityArgs args, CustomResourceOptions? opts = null)
    public Community(String name, CommunityArgs args)
public Community(String name, CommunityArgs args, CustomResourceOptions options)

    type: fortios:system/snmp/community:Community
properties: # The arguments to resource properties.
options: # Bag of options to control resource's behavior.

    Parameters

    name string
    The unique name of the resource.
    args CommunityArgs
    The arguments to resource properties.
    opts CustomResourceOptions
    Bag of options to control resource's behavior.
    resource_name str
    The unique name of the resource.
    args CommunityArgs
    The arguments to resource properties.
    opts ResourceOptions
    Bag of options to control resource's behavior.
    ctx Context
    Context object for the current deployment.
    name string
    The unique name of the resource.
    args CommunityArgs
    The arguments to resource properties.
    opts ResourceOption
    Bag of options to control resource's behavior.
    name string
    The unique name of the resource.
    args CommunityArgs
    The arguments to resource properties.
    opts CustomResourceOptions
    Bag of options to control resource's behavior.
    name String
    The unique name of the resource.
    args CommunityArgs
    The arguments to resource properties.
    options CustomResourceOptions
    Bag of options to control resource's behavior.

    Community Resource Properties

    To learn more about resource properties and how to use them, see Inputs and Outputs in the Architecture and Concepts docs.

    Inputs

    The Community resource accepts the following input properties:

    Fosid int
    Community ID.
    DynamicSortSubtable string
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    Events string
    SNMP trap events.
    GetAllTables string
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    Hosts List<Pulumiverse.Fortios.System.Snmp.Inputs.CommunityHost>
    Configure IPv4 SNMP managers (hosts). The structure of hosts block is documented below.
    Hosts6s List<Pulumiverse.Fortios.System.Snmp.Inputs.CommunityHosts6>
    Configure IPv6 SNMP managers. The structure of hosts6 block is documented below.
    MibView string
    SNMP access control MIB view.
    Name string
    Community name.
    QueryV1Port int
    SNMP v1 query port (default = 161).
    QueryV1Status string
    Enable/disable SNMP v1 queries. Valid values: enable, disable.
    QueryV2cPort int
    SNMP v2c query port (default = 161).
    QueryV2cStatus string
    Enable/disable SNMP v2c queries. Valid values: enable, disable.
    Status string
    Enable/disable this SNMP community. Valid values: enable, disable.
    TrapV1Lport int
    SNMP v1 trap local port (default = 162).
    TrapV1Rport int
    SNMP v1 trap remote port (default = 162).
    TrapV1Status string
    Enable/disable SNMP v1 traps. Valid values: enable, disable.
    TrapV2cLport int
    SNMP v2c trap local port (default = 162).
    TrapV2cRport int
    SNMP v2c trap remote port (default = 162).
    TrapV2cStatus string
    Enable/disable SNMP v2c traps. Valid values: enable, disable.
    Vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    Vdoms List<Pulumiverse.Fortios.System.Snmp.Inputs.CommunityVdom>
    SNMP access control VDOMs. The structure of vdoms block is documented below.
    Fosid int
    Community ID.
    DynamicSortSubtable string
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    Events string
    SNMP trap events.
    GetAllTables string
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    Hosts []CommunityHostArgs
    Configure IPv4 SNMP managers (hosts). The structure of hosts block is documented below.
    Hosts6s []CommunityHosts6Args
    Configure IPv6 SNMP managers. The structure of hosts6 block is documented below.
    MibView string
    SNMP access control MIB view.
    Name string
    Community name.
    QueryV1Port int
    SNMP v1 query port (default = 161).
    QueryV1Status string
    Enable/disable SNMP v1 queries. Valid values: enable, disable.
    QueryV2cPort int
    SNMP v2c query port (default = 161).
    QueryV2cStatus string
    Enable/disable SNMP v2c queries. Valid values: enable, disable.
    Status string
    Enable/disable this SNMP community. Valid values: enable, disable.
    TrapV1Lport int
    SNMP v1 trap local port (default = 162).
    TrapV1Rport int
    SNMP v1 trap remote port (default = 162).
    TrapV1Status string
    Enable/disable SNMP v1 traps. Valid values: enable, disable.
    TrapV2cLport int
    SNMP v2c trap local port (default = 162).
    TrapV2cRport int
    SNMP v2c trap remote port (default = 162).
    TrapV2cStatus string
    Enable/disable SNMP v2c traps. Valid values: enable, disable.
    Vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    Vdoms []CommunityVdomArgs
    SNMP access control VDOMs. The structure of vdoms block is documented below.
    fosid Integer
    Community ID.
    dynamicSortSubtable String
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    events String
    SNMP trap events.
    getAllTables String
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    hosts List<CommunityHost>
    Configure IPv4 SNMP managers (hosts). The structure of hosts block is documented below.
    hosts6s List<CommunityHosts6>
    Configure IPv6 SNMP managers. The structure of hosts6 block is documented below.
    mibView String
    SNMP access control MIB view.
    name String
    Community name.
    queryV1Port Integer
    SNMP v1 query port (default = 161).
    queryV1Status String
    Enable/disable SNMP v1 queries. Valid values: enable, disable.
    queryV2cPort Integer
    SNMP v2c query port (default = 161).
    queryV2cStatus String
    Enable/disable SNMP v2c queries. Valid values: enable, disable.
    status String
    Enable/disable this SNMP community. Valid values: enable, disable.
    trapV1Lport Integer
    SNMP v1 trap local port (default = 162).
    trapV1Rport Integer
    SNMP v1 trap remote port (default = 162).
    trapV1Status String
    Enable/disable SNMP v1 traps. Valid values: enable, disable.
    trapV2cLport Integer
    SNMP v2c trap local port (default = 162).
    trapV2cRport Integer
    SNMP v2c trap remote port (default = 162).
    trapV2cStatus String
    Enable/disable SNMP v2c traps. Valid values: enable, disable.
    vdomparam String
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    vdoms List<CommunityVdom>
    SNMP access control VDOMs. The structure of vdoms block is documented below.
    fosid number
    Community ID.
    dynamicSortSubtable string
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    events string
    SNMP trap events.
    getAllTables string
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    hosts CommunityHost[]
    Configure IPv4 SNMP managers (hosts). The structure of hosts block is documented below.
    hosts6s CommunityHosts6[]
    Configure IPv6 SNMP managers. The structure of hosts6 block is documented below.
    mibView string
    SNMP access control MIB view.
    name string
    Community name.
    queryV1Port number
    SNMP v1 query port (default = 161).
    queryV1Status string
    Enable/disable SNMP v1 queries. Valid values: enable, disable.
    queryV2cPort number
    SNMP v2c query port (default = 161).
    queryV2cStatus string
    Enable/disable SNMP v2c queries. Valid values: enable, disable.
    status string
    Enable/disable this SNMP community. Valid values: enable, disable.
    trapV1Lport number
    SNMP v1 trap local port (default = 162).
    trapV1Rport number
    SNMP v1 trap remote port (default = 162).
    trapV1Status string
    Enable/disable SNMP v1 traps. Valid values: enable, disable.
    trapV2cLport number
    SNMP v2c trap local port (default = 162).
    trapV2cRport number
    SNMP v2c trap remote port (default = 162).
    trapV2cStatus string
    Enable/disable SNMP v2c traps. Valid values: enable, disable.
    vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    vdoms CommunityVdom[]
    SNMP access control VDOMs. The structure of vdoms block is documented below.
    fosid int
    Community ID.
    dynamic_sort_subtable str
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    events str
    SNMP trap events.
    get_all_tables str
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    hosts Sequence[CommunityHostArgs]
    Configure IPv4 SNMP managers (hosts). The structure of hosts block is documented below.
    hosts6s Sequence[CommunityHosts6Args]
    Configure IPv6 SNMP managers. The structure of hosts6 block is documented below.
    mib_view str
    SNMP access control MIB view.
    name str
    Community name.
    query_v1_port int
    SNMP v1 query port (default = 161).
    query_v1_status str
    Enable/disable SNMP v1 queries. Valid values: enable, disable.
    query_v2c_port int
    SNMP v2c query port (default = 161).
    query_v2c_status str
    Enable/disable SNMP v2c queries. Valid values: enable, disable.
    status str
    Enable/disable this SNMP community. Valid values: enable, disable.
    trap_v1_lport int
    SNMP v1 trap local port (default = 162).
    trap_v1_rport int
    SNMP v1 trap remote port (default = 162).
    trap_v1_status str
    Enable/disable SNMP v1 traps. Valid values: enable, disable.
    trap_v2c_lport int
    SNMP v2c trap local port (default = 162).
    trap_v2c_rport int
    SNMP v2c trap remote port (default = 162).
    trap_v2c_status str
    Enable/disable SNMP v2c traps. Valid values: enable, disable.
    vdomparam str
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    vdoms Sequence[CommunityVdomArgs]
    SNMP access control VDOMs. The structure of vdoms block is documented below.
    fosid Number
    Community ID.
    dynamicSortSubtable String
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    events String
    SNMP trap events.
    getAllTables String
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    hosts List<Property Map>
    Configure IPv4 SNMP managers (hosts). The structure of hosts block is documented below.
    hosts6s List<Property Map>
    Configure IPv6 SNMP managers. The structure of hosts6 block is documented below.
    mibView String
    SNMP access control MIB view.
    name String
    Community name.
    queryV1Port Number
    SNMP v1 query port (default = 161).
    queryV1Status String
    Enable/disable SNMP v1 queries. Valid values: enable, disable.
    queryV2cPort Number
    SNMP v2c query port (default = 161).
    queryV2cStatus String
    Enable/disable SNMP v2c queries. Valid values: enable, disable.
    status String
    Enable/disable this SNMP community. Valid values: enable, disable.
    trapV1Lport Number
    SNMP v1 trap local port (default = 162).
    trapV1Rport Number
    SNMP v1 trap remote port (default = 162).
    trapV1Status String
    Enable/disable SNMP v1 traps. Valid values: enable, disable.
    trapV2cLport Number
    SNMP v2c trap local port (default = 162).
    trapV2cRport Number
    SNMP v2c trap remote port (default = 162).
    trapV2cStatus String
    Enable/disable SNMP v2c traps. Valid values: enable, disable.
    vdomparam String
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    vdoms List<Property Map>
    SNMP access control VDOMs. The structure of vdoms block is documented below.

    Outputs

    All input properties are implicitly available as output properties. Additionally, the Community resource produces the following output properties:

    Id string
    The provider-assigned unique ID for this managed resource.
    Id string
    The provider-assigned unique ID for this managed resource.
    id String
    The provider-assigned unique ID for this managed resource.
    id string
    The provider-assigned unique ID for this managed resource.
    id str
    The provider-assigned unique ID for this managed resource.
    id String
    The provider-assigned unique ID for this managed resource.

    Look up Existing Community Resource

    Get an existing Community resource’s state with the given name, ID, and optional extra properties used to qualify the lookup.

    public static get(name: string, id: Input<ID>, state?: CommunityState, opts?: CustomResourceOptions): Community
    @staticmethod
def get(resource_name: str,
        id: str,
        opts: Optional[ResourceOptions] = None,
        dynamic_sort_subtable: Optional[str] = None,
        events: Optional[str] = None,
        fosid: Optional[int] = None,
        get_all_tables: Optional[str] = None,
        hosts: Optional[Sequence[CommunityHostArgs]] = None,
        hosts6s: Optional[Sequence[CommunityHosts6Args]] = None,
        mib_view: Optional[str] = None,
        name: Optional[str] = None,
        query_v1_port: Optional[int] = None,
        query_v1_status: Optional[str] = None,
        query_v2c_port: Optional[int] = None,
        query_v2c_status: Optional[str] = None,
        status: Optional[str] = None,
        trap_v1_lport: Optional[int] = None,
        trap_v1_rport: Optional[int] = None,
        trap_v1_status: Optional[str] = None,
        trap_v2c_lport: Optional[int] = None,
        trap_v2c_rport: Optional[int] = None,
        trap_v2c_status: Optional[str] = None,
        vdomparam: Optional[str] = None,
        vdoms: Optional[Sequence[CommunityVdomArgs]] = None) -> Community
    func GetCommunity(ctx *Context, name string, id IDInput, state *CommunityState, opts ...ResourceOption) (*Community, error)
    public static Community Get(string name, Input<string> id, CommunityState? state, CustomResourceOptions? opts = null)
    public static Community get(String name, Output<String> id, CommunityState state, CustomResourceOptions options)
    Resource lookup is not supported in YAML
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    resource_name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    The following state arguments are supported:
    DynamicSortSubtable string
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    Events string
    SNMP trap events.
    Fosid int
    Community ID.
    GetAllTables string
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    Hosts List<Pulumiverse.Fortios.System.Snmp.Inputs.CommunityHost>
    Configure IPv4 SNMP managers (hosts). The structure of hosts block is documented below.
    Hosts6s List<Pulumiverse.Fortios.System.Snmp.Inputs.CommunityHosts6>
    Configure IPv6 SNMP managers. The structure of hosts6 block is documented below.
    MibView string
    SNMP access control MIB view.
    Name string
    Community name.
    QueryV1Port int
    SNMP v1 query port (default = 161).
    QueryV1Status string
    Enable/disable SNMP v1 queries. Valid values: enable, disable.
    QueryV2cPort int
    SNMP v2c query port (default = 161).
    QueryV2cStatus string
    Enable/disable SNMP v2c queries. Valid values: enable, disable.
    Status string
    Enable/disable this SNMP community. Valid values: enable, disable.
    TrapV1Lport int
    SNMP v1 trap local port (default = 162).
    TrapV1Rport int
    SNMP v1 trap remote port (default = 162).
    TrapV1Status string
    Enable/disable SNMP v1 traps. Valid values: enable, disable.
    TrapV2cLport int
    SNMP v2c trap local port (default = 162).
    TrapV2cRport int
    SNMP v2c trap remote port (default = 162).
    TrapV2cStatus string
    Enable/disable SNMP v2c traps. Valid values: enable, disable.
    Vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    Vdoms List<Pulumiverse.Fortios.System.Snmp.Inputs.CommunityVdom>
    SNMP access control VDOMs. The structure of vdoms block is documented below.
    DynamicSortSubtable string
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    Events string
    SNMP trap events.
    Fosid int
    Community ID.
    GetAllTables string
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    Hosts []CommunityHostArgs
    Configure IPv4 SNMP managers (hosts). The structure of hosts block is documented below.
    Hosts6s []CommunityHosts6Args
    Configure IPv6 SNMP managers. The structure of hosts6 block is documented below.
    MibView string
    SNMP access control MIB view.
    Name string
    Community name.
    QueryV1Port int
    SNMP v1 query port (default = 161).
    QueryV1Status string
    Enable/disable SNMP v1 queries. Valid values: enable, disable.
    QueryV2cPort int
    SNMP v2c query port (default = 161).
    QueryV2cStatus string
    Enable/disable SNMP v2c queries. Valid values: enable, disable.
    Status string
    Enable/disable this SNMP community. Valid values: enable, disable.
    TrapV1Lport int
    SNMP v1 trap local port (default = 162).
    TrapV1Rport int
    SNMP v1 trap remote port (default = 162).
    TrapV1Status string
    Enable/disable SNMP v1 traps. Valid values: enable, disable.
    TrapV2cLport int
    SNMP v2c trap local port (default = 162).
    TrapV2cRport int
    SNMP v2c trap remote port (default = 162).
    TrapV2cStatus string
    Enable/disable SNMP v2c traps. Valid values: enable, disable.
    Vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    Vdoms []CommunityVdomArgs
    SNMP access control VDOMs. The structure of vdoms block is documented below.
    dynamicSortSubtable String
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    events String
    SNMP trap events.
    fosid Integer
    Community ID.
    getAllTables String
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    hosts List<CommunityHost>
    Configure IPv4 SNMP managers (hosts). The structure of hosts block is documented below.
    hosts6s List<CommunityHosts6>
    Configure IPv6 SNMP managers. The structure of hosts6 block is documented below.
    mibView String
    SNMP access control MIB view.
    name String
    Community name.
    queryV1Port Integer
    SNMP v1 query port (default = 161).
    queryV1Status String
    Enable/disable SNMP v1 queries. Valid values: enable, disable.
    queryV2cPort Integer
    SNMP v2c query port (default = 161).
    queryV2cStatus String
    Enable/disable SNMP v2c queries. Valid values: enable, disable.
    status String
    Enable/disable this SNMP community. Valid values: enable, disable.
    trapV1Lport Integer
    SNMP v1 trap local port (default = 162).
    trapV1Rport Integer
    SNMP v1 trap remote port (default = 162).
    trapV1Status String
    Enable/disable SNMP v1 traps. Valid values: enable, disable.
    trapV2cLport Integer
    SNMP v2c trap local port (default = 162).
    trapV2cRport Integer
    SNMP v2c trap remote port (default = 162).
    trapV2cStatus String
    Enable/disable SNMP v2c traps. Valid values: enable, disable.
    vdomparam String
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    vdoms List<CommunityVdom>
    SNMP access control VDOMs. The structure of vdoms block is documented below.
    dynamicSortSubtable string
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    events string
    SNMP trap events.
    fosid number
    Community ID.
    getAllTables string
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    hosts CommunityHost[]
    Configure IPv4 SNMP managers (hosts). The structure of hosts block is documented below.
    hosts6s CommunityHosts6[]
    Configure IPv6 SNMP managers. The structure of hosts6 block is documented below.
    mibView string
    SNMP access control MIB view.
    name string
    Community name.
    queryV1Port number
    SNMP v1 query port (default = 161).
    queryV1Status string
    Enable/disable SNMP v1 queries. Valid values: enable, disable.
    queryV2cPort number
    SNMP v2c query port (default = 161).
    queryV2cStatus string
    Enable/disable SNMP v2c queries. Valid values: enable, disable.
    status string
    Enable/disable this SNMP community. Valid values: enable, disable.
    trapV1Lport number
    SNMP v1 trap local port (default = 162).
    trapV1Rport number
    SNMP v1 trap remote port (default = 162).
    trapV1Status string
    Enable/disable SNMP v1 traps. Valid values: enable, disable.
    trapV2cLport number
    SNMP v2c trap local port (default = 162).
    trapV2cRport number
    SNMP v2c trap remote port (default = 162).
    trapV2cStatus string
    Enable/disable SNMP v2c traps. Valid values: enable, disable.
    vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    vdoms CommunityVdom[]
    SNMP access control VDOMs. The structure of vdoms block is documented below.
    dynamic_sort_subtable str
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    events str
    SNMP trap events.
    fosid int
    Community ID.
    get_all_tables str
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    hosts Sequence[CommunityHostArgs]
    Configure IPv4 SNMP managers (hosts). The structure of hosts block is documented below.
    hosts6s Sequence[CommunityHosts6Args]
    Configure IPv6 SNMP managers. The structure of hosts6 block is documented below.
    mib_view str
    SNMP access control MIB view.
    name str
    Community name.
    query_v1_port int
    SNMP v1 query port (default = 161).
    query_v1_status str
    Enable/disable SNMP v1 queries. Valid values: enable, disable.
    query_v2c_port int
    SNMP v2c query port (default = 161).
    query_v2c_status str
    Enable/disable SNMP v2c queries. Valid values: enable, disable.
    status str
    Enable/disable this SNMP community. Valid values: enable, disable.
    trap_v1_lport int
    SNMP v1 trap local port (default = 162).
    trap_v1_rport int
    SNMP v1 trap remote port (default = 162).
    trap_v1_status str
    Enable/disable SNMP v1 traps. Valid values: enable, disable.
    trap_v2c_lport int
    SNMP v2c trap local port (default = 162).
    trap_v2c_rport int
    SNMP v2c trap remote port (default = 162).
    trap_v2c_status str
    Enable/disable SNMP v2c traps. Valid values: enable, disable.
    vdomparam str
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    vdoms Sequence[CommunityVdomArgs]
    SNMP access control VDOMs. The structure of vdoms block is documented below.
    dynamicSortSubtable String
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    events String
    SNMP trap events.
    fosid Number
    Community ID.
    getAllTables String
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    hosts List<Property Map>
    Configure IPv4 SNMP managers (hosts). The structure of hosts block is documented below.
    hosts6s List<Property Map>
    Configure IPv6 SNMP managers. The structure of hosts6 block is documented below.
    mibView String
    SNMP access control MIB view.
    name String
    Community name.
    queryV1Port Number
    SNMP v1 query port (default = 161).
    queryV1Status String
    Enable/disable SNMP v1 queries. Valid values: enable, disable.
    queryV2cPort Number
    SNMP v2c query port (default = 161).
    queryV2cStatus String
    Enable/disable SNMP v2c queries. Valid values: enable, disable.
    status String
    Enable/disable this SNMP community. Valid values: enable, disable.
    trapV1Lport Number
    SNMP v1 trap local port (default = 162).
    trapV1Rport Number
    SNMP v1 trap remote port (default = 162).
    trapV1Status String
    Enable/disable SNMP v1 traps. Valid values: enable, disable.
    trapV2cLport Number
    SNMP v2c trap local port (default = 162).
    trapV2cRport Number
    SNMP v2c trap remote port (default = 162).
    trapV2cStatus String
    Enable/disable SNMP v2c traps. Valid values: enable, disable.
    vdomparam String
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    vdoms List<Property Map>
    SNMP access control VDOMs. The structure of vdoms block is documented below.

    Supporting Types

    CommunityHost, CommunityHostArgs

    HaDirect string
    Enable/disable direct management of HA cluster members. Valid values: enable, disable.
    HostType string
    Control whether the SNMP manager sends SNMP queries, receives SNMP traps, or both. Valid values: any, query, trap.
    Id int
    Host6 entry ID.
    Ip string
    IPv4 address of the SNMP manager (host).
    SourceIp string
    Source IPv4 address for SNMP traps.
    HaDirect string
    Enable/disable direct management of HA cluster members. Valid values: enable, disable.
    HostType string
    Control whether the SNMP manager sends SNMP queries, receives SNMP traps, or both. Valid values: any, query, trap.
    Id int
    Host6 entry ID.
    Ip string
    IPv4 address of the SNMP manager (host).
    SourceIp string
    Source IPv4 address for SNMP traps.
    haDirect String
    Enable/disable direct management of HA cluster members. Valid values: enable, disable.
    hostType String
    Control whether the SNMP manager sends SNMP queries, receives SNMP traps, or both. Valid values: any, query, trap.
    id Integer
    Host6 entry ID.
    ip String
    IPv4 address of the SNMP manager (host).
    sourceIp String
    Source IPv4 address for SNMP traps.
    haDirect string
    Enable/disable direct management of HA cluster members. Valid values: enable, disable.
    hostType string
    Control whether the SNMP manager sends SNMP queries, receives SNMP traps, or both. Valid values: any, query, trap.
    id number
    Host6 entry ID.
    ip string
    IPv4 address of the SNMP manager (host).
    sourceIp string
    Source IPv4 address for SNMP traps.
    ha_direct str
    Enable/disable direct management of HA cluster members. Valid values: enable, disable.
    host_type str
    Control whether the SNMP manager sends SNMP queries, receives SNMP traps, or both. Valid values: any, query, trap.
    id int
    Host6 entry ID.
    ip str
    IPv4 address of the SNMP manager (host).
    source_ip str
    Source IPv4 address for SNMP traps.
    haDirect String
    Enable/disable direct management of HA cluster members. Valid values: enable, disable.
    hostType String
    Control whether the SNMP manager sends SNMP queries, receives SNMP traps, or both. Valid values: any, query, trap.
    id Number
    Host6 entry ID.
    ip String
    IPv4 address of the SNMP manager (host).
    sourceIp String
    Source IPv4 address for SNMP traps.

    CommunityHosts6, CommunityHosts6Args

    HaDirect string
    HostType string
    Id int
    an identifier for the resource with format {{fosid}}.
    Ipv6 string
    SourceIpv6 string
    HaDirect string
    HostType string
    Id int
    an identifier for the resource with format {{fosid}}.
    Ipv6 string
    SourceIpv6 string
    haDirect String
    hostType String
    id Integer
    an identifier for the resource with format {{fosid}}.
    ipv6 String
    sourceIpv6 String
    haDirect string
    hostType string
    id number
    an identifier for the resource with format {{fosid}}.
    ipv6 string
    sourceIpv6 string
    ha_direct str
    host_type str
    id int
    an identifier for the resource with format {{fosid}}.
    ipv6 str
    source_ipv6 str
    haDirect String
    hostType String
    id Number
    an identifier for the resource with format {{fosid}}.
    ipv6 String
    sourceIpv6 String

    CommunityVdom, CommunityVdomArgs

    Name string
    VDOM name
    Name string
    VDOM name
    name String
    VDOM name
    name string
    VDOM name
    name str
    VDOM name
    name String
    VDOM name

    Import

    SystemSnmp Community can be imported using any of these accepted formats:

    $ pulumi import fortios:system/snmp/community:Community labelname {{fosid}}

    If you do not want to import arguments of block:

    $ export “FORTIOS_IMPORT_TABLE”=“false”

    $ pulumi import fortios:system/snmp/community:Community labelname {{fosid}}

    $ unset “FORTIOS_IMPORT_TABLE”

    To learn more about importing existing cloud resources, see Importing resources.

    Package Details

    Repository
    fortios pulumiverse/pulumi-fortios
    License
    Apache-2.0
    Notes
    This Pulumi package is based on the fortios Terraform Provider.
    fortios logo
    Fortios v0.0.6 published on Tuesday, Jul 9, 2024 by pulumiverse
    pulumiverse/pulumi-fortios