fortios.vpn/ipsec.Forticlient
Explore with Pulumi AI
Configure FortiClient policy realm.
Example Usage
import * as pulumi from "@pulumi/pulumi";
import * as fortios from "@pulumiverse/fortios";
// fortios_vpnipsec_phase1interface.trname2:
const trname4 = new fortios.vpn.ipsec.Phase1interface("trname4", {
acctVerify: "disable",
addGwRoute: "disable",
addRoute: "enable",
assignIp: "enable",
assignIpFrom: "range",
authmethod: "psk",
authusrgrp: "Guest-group",
autoDiscoveryForwarder: "disable",
autoDiscoveryPsk: "disable",
autoDiscoveryReceiver: "disable",
autoDiscoverySender: "disable",
autoNegotiate: "enable",
certIdValidation: "enable",
childlessIke: "disable",
clientAutoNegotiate: "disable",
clientKeepAlive: "disable",
comments: "VPN: Dialup_IPsec (Created by VPN wizard)",
defaultGw: "0.0.0.0",
defaultGwPriority: 0,
dhgrp: "14 5",
digitalSignatureAuth: "disable",
distance: 15,
dnsMode: "auto",
dpd: "on-idle",
dpdRetrycount: 3,
dpdRetryinterval: "60",
eap: "disable",
eapIdentity: "use-id-payload",
encapLocalGw4: "0.0.0.0",
encapLocalGw6: "::",
encapRemoteGw4: "0.0.0.0",
encapRemoteGw6: "::",
encapsulation: "none",
encapsulationAddress: "ike",
enforceUniqueId: "disable",
exchangeInterfaceIp: "disable",
exchangeIpAddr4: "0.0.0.0",
exchangeIpAddr6: "::",
forticlientEnforcement: "disable",
fragmentation: "enable",
fragmentationMtu: 1200,
groupAuthentication: "disable",
haSyncEspSeqno: "enable",
idleTimeout: "disable",
idleTimeoutinterval: 15,
ikeVersion: "1",
includeLocalLan: "disable",
"interface": "port4",
ipVersion: "4",
ipv4DnsServer1: "0.0.0.0",
ipv4DnsServer2: "0.0.0.0",
ipv4DnsServer3: "0.0.0.0",
ipv4EndIp: "10.10.10.10",
ipv4Netmask: "255.255.255.192",
ipv4SplitInclude: "FIREWALL_AUTH_PORTAL_ADDRESS",
ipv4StartIp: "10.10.10.1",
ipv4WinsServer1: "0.0.0.0",
ipv4WinsServer2: "0.0.0.0",
ipv6DnsServer1: "::",
ipv6DnsServer2: "::",
ipv6DnsServer3: "::",
ipv6EndIp: "::",
ipv6Prefix: 128,
ipv6StartIp: "::",
keepalive: 10,
keylife: 86400,
localGw: "0.0.0.0",
localGw6: "::",
localidType: "auto",
meshSelectorType: "disable",
mode: "aggressive",
modeCfg: "enable",
monitorHoldDownDelay: 0,
monitorHoldDownTime: "00:00",
monitorHoldDownType: "immediate",
monitorHoldDownWeekday: "sunday",
nattraversal: "enable",
negotiateTimeout: 30,
netDevice: "enable",
passiveMode: "disable",
peertype: "any",
psksecret: "NCIEW32930293203932",
ppk: "disable",
priority: 0,
proposal: "aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1",
reauth: "disable",
rekey: "enable",
remoteGw: "0.0.0.0",
remoteGw6: "::",
rsaSignatureFormat: "pkcs1",
savePassword: "enable",
sendCertChain: "enable",
signatureHashAlg: "sha2-512 sha2-384 sha2-256 sha1",
suiteB: "disable",
tunnelSearch: "selectors",
type: "dynamic",
unitySupport: "enable",
wizardType: "dialup-forticlient",
xauthtype: "auto",
});
// fortios_vpnipsec_phase2interface.trname1:
const trname3 = new fortios.vpn.ipsec.Phase2interface("trname3", {
addRoute: "phase1",
autoDiscoveryForwarder: "phase1",
autoDiscoverySender: "phase1",
autoNegotiate: "disable",
dhcpIpsec: "disable",
dhgrp: "14 5",
dstAddrType: "subnet",
dstEndIp: "0.0.0.0",
dstEndIp6: "::",
dstPort: 0,
dstStartIp: "0.0.0.0",
dstStartIp6: "::",
dstSubnet: "0.0.0.0 0.0.0.0",
dstSubnet6: "::/0",
encapsulation: "tunnel-mode",
keepalive: "disable",
keylifeType: "seconds",
keylifekbs: 5120,
keylifeseconds: 43200,
l2tp: "disable",
pfs: "enable",
phase1name: trname4.name,
proposal: "aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm chacha20poly1305",
protocol: 0,
replay: "enable",
routeOverlap: "use-new",
singleSource: "disable",
srcAddrType: "subnet",
srcEndIp: "0.0.0.0",
srcEndIp6: "::",
srcPort: 0,
srcStartIp: "0.0.0.0",
srcStartIp6: "::",
srcSubnet: "0.0.0.0 0.0.0.0",
srcSubnet6: "::/0",
});
const trname = new fortios.vpn.ipsec.Forticlient("trname", {
phase2name: trname3.name,
realm: "1",
status: "enable",
usergroupname: "Guest-group",
});
import pulumi
import pulumiverse_fortios as fortios
# fortios_vpnipsec_phase1interface.trname2:
trname4 = fortios.vpn.ipsec.Phase1interface("trname4",
acct_verify="disable",
add_gw_route="disable",
add_route="enable",
assign_ip="enable",
assign_ip_from="range",
authmethod="psk",
authusrgrp="Guest-group",
auto_discovery_forwarder="disable",
auto_discovery_psk="disable",
auto_discovery_receiver="disable",
auto_discovery_sender="disable",
auto_negotiate="enable",
cert_id_validation="enable",
childless_ike="disable",
client_auto_negotiate="disable",
client_keep_alive="disable",
comments="VPN: Dialup_IPsec (Created by VPN wizard)",
default_gw="0.0.0.0",
default_gw_priority=0,
dhgrp="14 5",
digital_signature_auth="disable",
distance=15,
dns_mode="auto",
dpd="on-idle",
dpd_retrycount=3,
dpd_retryinterval="60",
eap="disable",
eap_identity="use-id-payload",
encap_local_gw4="0.0.0.0",
encap_local_gw6="::",
encap_remote_gw4="0.0.0.0",
encap_remote_gw6="::",
encapsulation="none",
encapsulation_address="ike",
enforce_unique_id="disable",
exchange_interface_ip="disable",
exchange_ip_addr4="0.0.0.0",
exchange_ip_addr6="::",
forticlient_enforcement="disable",
fragmentation="enable",
fragmentation_mtu=1200,
group_authentication="disable",
ha_sync_esp_seqno="enable",
idle_timeout="disable",
idle_timeoutinterval=15,
ike_version="1",
include_local_lan="disable",
interface="port4",
ip_version="4",
ipv4_dns_server1="0.0.0.0",
ipv4_dns_server2="0.0.0.0",
ipv4_dns_server3="0.0.0.0",
ipv4_end_ip="10.10.10.10",
ipv4_netmask="255.255.255.192",
ipv4_split_include="FIREWALL_AUTH_PORTAL_ADDRESS",
ipv4_start_ip="10.10.10.1",
ipv4_wins_server1="0.0.0.0",
ipv4_wins_server2="0.0.0.0",
ipv6_dns_server1="::",
ipv6_dns_server2="::",
ipv6_dns_server3="::",
ipv6_end_ip="::",
ipv6_prefix=128,
ipv6_start_ip="::",
keepalive=10,
keylife=86400,
local_gw="0.0.0.0",
local_gw6="::",
localid_type="auto",
mesh_selector_type="disable",
mode="aggressive",
mode_cfg="enable",
monitor_hold_down_delay=0,
monitor_hold_down_time="00:00",
monitor_hold_down_type="immediate",
monitor_hold_down_weekday="sunday",
nattraversal="enable",
negotiate_timeout=30,
net_device="enable",
passive_mode="disable",
peertype="any",
psksecret="NCIEW32930293203932",
ppk="disable",
priority=0,
proposal="aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1",
reauth="disable",
rekey="enable",
remote_gw="0.0.0.0",
remote_gw6="::",
rsa_signature_format="pkcs1",
save_password="enable",
send_cert_chain="enable",
signature_hash_alg="sha2-512 sha2-384 sha2-256 sha1",
suite_b="disable",
tunnel_search="selectors",
type="dynamic",
unity_support="enable",
wizard_type="dialup-forticlient",
xauthtype="auto")
# fortios_vpnipsec_phase2interface.trname1:
trname3 = fortios.vpn.ipsec.Phase2interface("trname3",
add_route="phase1",
auto_discovery_forwarder="phase1",
auto_discovery_sender="phase1",
auto_negotiate="disable",
dhcp_ipsec="disable",
dhgrp="14 5",
dst_addr_type="subnet",
dst_end_ip="0.0.0.0",
dst_end_ip6="::",
dst_port=0,
dst_start_ip="0.0.0.0",
dst_start_ip6="::",
dst_subnet="0.0.0.0 0.0.0.0",
dst_subnet6="::/0",
encapsulation="tunnel-mode",
keepalive="disable",
keylife_type="seconds",
keylifekbs=5120,
keylifeseconds=43200,
l2tp="disable",
pfs="enable",
phase1name=trname4.name,
proposal="aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm chacha20poly1305",
protocol=0,
replay="enable",
route_overlap="use-new",
single_source="disable",
src_addr_type="subnet",
src_end_ip="0.0.0.0",
src_end_ip6="::",
src_port=0,
src_start_ip="0.0.0.0",
src_start_ip6="::",
src_subnet="0.0.0.0 0.0.0.0",
src_subnet6="::/0")
trname = fortios.vpn.ipsec.Forticlient("trname",
phase2name=trname3.name,
realm="1",
status="enable",
usergroupname="Guest-group")
package main
import (
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
"github.com/pulumiverse/pulumi-fortios/sdk/go/fortios/vpn"
)
func main() {
pulumi.Run(func(ctx *pulumi.Context) error {
// fortios_vpnipsec_phase1interface.trname2:
trname4, err := vpn.NewPhase1interface(ctx, "trname4", &vpn.Phase1interfaceArgs{
AcctVerify: pulumi.String("disable"),
AddGwRoute: pulumi.String("disable"),
AddRoute: pulumi.String("enable"),
AssignIp: pulumi.String("enable"),
AssignIpFrom: pulumi.String("range"),
Authmethod: pulumi.String("psk"),
Authusrgrp: pulumi.String("Guest-group"),
AutoDiscoveryForwarder: pulumi.String("disable"),
AutoDiscoveryPsk: pulumi.String("disable"),
AutoDiscoveryReceiver: pulumi.String("disable"),
AutoDiscoverySender: pulumi.String("disable"),
AutoNegotiate: pulumi.String("enable"),
CertIdValidation: pulumi.String("enable"),
ChildlessIke: pulumi.String("disable"),
ClientAutoNegotiate: pulumi.String("disable"),
ClientKeepAlive: pulumi.String("disable"),
Comments: pulumi.String("VPN: Dialup_IPsec (Created by VPN wizard)"),
DefaultGw: pulumi.String("0.0.0.0"),
DefaultGwPriority: pulumi.Int(0),
Dhgrp: pulumi.String("14 5"),
DigitalSignatureAuth: pulumi.String("disable"),
Distance: pulumi.Int(15),
DnsMode: pulumi.String("auto"),
Dpd: pulumi.String("on-idle"),
DpdRetrycount: pulumi.Int(3),
DpdRetryinterval: pulumi.String("60"),
Eap: pulumi.String("disable"),
EapIdentity: pulumi.String("use-id-payload"),
EncapLocalGw4: pulumi.String("0.0.0.0"),
EncapLocalGw6: pulumi.String("::"),
EncapRemoteGw4: pulumi.String("0.0.0.0"),
EncapRemoteGw6: pulumi.String("::"),
Encapsulation: pulumi.String("none"),
EncapsulationAddress: pulumi.String("ike"),
EnforceUniqueId: pulumi.String("disable"),
ExchangeInterfaceIp: pulumi.String("disable"),
ExchangeIpAddr4: pulumi.String("0.0.0.0"),
ExchangeIpAddr6: pulumi.String("::"),
ForticlientEnforcement: pulumi.String("disable"),
Fragmentation: pulumi.String("enable"),
FragmentationMtu: pulumi.Int(1200),
GroupAuthentication: pulumi.String("disable"),
HaSyncEspSeqno: pulumi.String("enable"),
IdleTimeout: pulumi.String("disable"),
IdleTimeoutinterval: pulumi.Int(15),
IkeVersion: pulumi.String("1"),
IncludeLocalLan: pulumi.String("disable"),
Interface: pulumi.String("port4"),
IpVersion: pulumi.String("4"),
Ipv4DnsServer1: pulumi.String("0.0.0.0"),
Ipv4DnsServer2: pulumi.String("0.0.0.0"),
Ipv4DnsServer3: pulumi.String("0.0.0.0"),
Ipv4EndIp: pulumi.String("10.10.10.10"),
Ipv4Netmask: pulumi.String("255.255.255.192"),
Ipv4SplitInclude: pulumi.String("FIREWALL_AUTH_PORTAL_ADDRESS"),
Ipv4StartIp: pulumi.String("10.10.10.1"),
Ipv4WinsServer1: pulumi.String("0.0.0.0"),
Ipv4WinsServer2: pulumi.String("0.0.0.0"),
Ipv6DnsServer1: pulumi.String("::"),
Ipv6DnsServer2: pulumi.String("::"),
Ipv6DnsServer3: pulumi.String("::"),
Ipv6EndIp: pulumi.String("::"),
Ipv6Prefix: pulumi.Int(128),
Ipv6StartIp: pulumi.String("::"),
Keepalive: pulumi.Int(10),
Keylife: pulumi.Int(86400),
LocalGw: pulumi.String("0.0.0.0"),
LocalGw6: pulumi.String("::"),
LocalidType: pulumi.String("auto"),
MeshSelectorType: pulumi.String("disable"),
Mode: pulumi.String("aggressive"),
ModeCfg: pulumi.String("enable"),
MonitorHoldDownDelay: pulumi.Int(0),
MonitorHoldDownTime: pulumi.String("00:00"),
MonitorHoldDownType: pulumi.String("immediate"),
MonitorHoldDownWeekday: pulumi.String("sunday"),
Nattraversal: pulumi.String("enable"),
NegotiateTimeout: pulumi.Int(30),
NetDevice: pulumi.String("enable"),
PassiveMode: pulumi.String("disable"),
Peertype: pulumi.String("any"),
Psksecret: pulumi.String("NCIEW32930293203932"),
Ppk: pulumi.String("disable"),
Priority: pulumi.Int(0),
Proposal: pulumi.String("aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1"),
Reauth: pulumi.String("disable"),
Rekey: pulumi.String("enable"),
RemoteGw: pulumi.String("0.0.0.0"),
RemoteGw6: pulumi.String("::"),
RsaSignatureFormat: pulumi.String("pkcs1"),
SavePassword: pulumi.String("enable"),
SendCertChain: pulumi.String("enable"),
SignatureHashAlg: pulumi.String("sha2-512 sha2-384 sha2-256 sha1"),
SuiteB: pulumi.String("disable"),
TunnelSearch: pulumi.String("selectors"),
Type: pulumi.String("dynamic"),
UnitySupport: pulumi.String("enable"),
WizardType: pulumi.String("dialup-forticlient"),
Xauthtype: pulumi.String("auto"),
})
if err != nil {
return err
}
// fortios_vpnipsec_phase2interface.trname1:
trname3, err := vpn.NewPhase2interface(ctx, "trname3", &vpn.Phase2interfaceArgs{
AddRoute: pulumi.String("phase1"),
AutoDiscoveryForwarder: pulumi.String("phase1"),
AutoDiscoverySender: pulumi.String("phase1"),
AutoNegotiate: pulumi.String("disable"),
DhcpIpsec: pulumi.String("disable"),
Dhgrp: pulumi.String("14 5"),
DstAddrType: pulumi.String("subnet"),
DstEndIp: pulumi.String("0.0.0.0"),
DstEndIp6: pulumi.String("::"),
DstPort: pulumi.Int(0),
DstStartIp: pulumi.String("0.0.0.0"),
DstStartIp6: pulumi.String("::"),
DstSubnet: pulumi.String("0.0.0.0 0.0.0.0"),
DstSubnet6: pulumi.String("::/0"),
Encapsulation: pulumi.String("tunnel-mode"),
Keepalive: pulumi.String("disable"),
KeylifeType: pulumi.String("seconds"),
Keylifekbs: pulumi.Int(5120),
Keylifeseconds: pulumi.Int(43200),
L2tp: pulumi.String("disable"),
Pfs: pulumi.String("enable"),
Phase1name: trname4.Name,
Proposal: pulumi.String("aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm chacha20poly1305"),
Protocol: pulumi.Int(0),
Replay: pulumi.String("enable"),
RouteOverlap: pulumi.String("use-new"),
SingleSource: pulumi.String("disable"),
SrcAddrType: pulumi.String("subnet"),
SrcEndIp: pulumi.String("0.0.0.0"),
SrcEndIp6: pulumi.String("::"),
SrcPort: pulumi.Int(0),
SrcStartIp: pulumi.String("0.0.0.0"),
SrcStartIp6: pulumi.String("::"),
SrcSubnet: pulumi.String("0.0.0.0 0.0.0.0"),
SrcSubnet6: pulumi.String("::/0"),
})
if err != nil {
return err
}
_, err = vpn.NewForticlient(ctx, "trname", &vpn.ForticlientArgs{
Phase2name: trname3.Name,
Realm: pulumi.String("1"),
Status: pulumi.String("enable"),
Usergroupname: pulumi.String("Guest-group"),
})
if err != nil {
return err
}
return nil
})
}
using System.Collections.Generic;
using System.Linq;
using Pulumi;
using Fortios = Pulumiverse.Fortios;
return await Deployment.RunAsync(() =>
{
// fortios_vpnipsec_phase1interface.trname2:
var trname4 = new Fortios.Vpn.Ipsec.Phase1interface("trname4", new()
{
AcctVerify = "disable",
AddGwRoute = "disable",
AddRoute = "enable",
AssignIp = "enable",
AssignIpFrom = "range",
Authmethod = "psk",
Authusrgrp = "Guest-group",
AutoDiscoveryForwarder = "disable",
AutoDiscoveryPsk = "disable",
AutoDiscoveryReceiver = "disable",
AutoDiscoverySender = "disable",
AutoNegotiate = "enable",
CertIdValidation = "enable",
ChildlessIke = "disable",
ClientAutoNegotiate = "disable",
ClientKeepAlive = "disable",
Comments = "VPN: Dialup_IPsec (Created by VPN wizard)",
DefaultGw = "0.0.0.0",
DefaultGwPriority = 0,
Dhgrp = "14 5",
DigitalSignatureAuth = "disable",
Distance = 15,
DnsMode = "auto",
Dpd = "on-idle",
DpdRetrycount = 3,
DpdRetryinterval = "60",
Eap = "disable",
EapIdentity = "use-id-payload",
EncapLocalGw4 = "0.0.0.0",
EncapLocalGw6 = "::",
EncapRemoteGw4 = "0.0.0.0",
EncapRemoteGw6 = "::",
Encapsulation = "none",
EncapsulationAddress = "ike",
EnforceUniqueId = "disable",
ExchangeInterfaceIp = "disable",
ExchangeIpAddr4 = "0.0.0.0",
ExchangeIpAddr6 = "::",
ForticlientEnforcement = "disable",
Fragmentation = "enable",
FragmentationMtu = 1200,
GroupAuthentication = "disable",
HaSyncEspSeqno = "enable",
IdleTimeout = "disable",
IdleTimeoutinterval = 15,
IkeVersion = "1",
IncludeLocalLan = "disable",
Interface = "port4",
IpVersion = "4",
Ipv4DnsServer1 = "0.0.0.0",
Ipv4DnsServer2 = "0.0.0.0",
Ipv4DnsServer3 = "0.0.0.0",
Ipv4EndIp = "10.10.10.10",
Ipv4Netmask = "255.255.255.192",
Ipv4SplitInclude = "FIREWALL_AUTH_PORTAL_ADDRESS",
Ipv4StartIp = "10.10.10.1",
Ipv4WinsServer1 = "0.0.0.0",
Ipv4WinsServer2 = "0.0.0.0",
Ipv6DnsServer1 = "::",
Ipv6DnsServer2 = "::",
Ipv6DnsServer3 = "::",
Ipv6EndIp = "::",
Ipv6Prefix = 128,
Ipv6StartIp = "::",
Keepalive = 10,
Keylife = 86400,
LocalGw = "0.0.0.0",
LocalGw6 = "::",
LocalidType = "auto",
MeshSelectorType = "disable",
Mode = "aggressive",
ModeCfg = "enable",
MonitorHoldDownDelay = 0,
MonitorHoldDownTime = "00:00",
MonitorHoldDownType = "immediate",
MonitorHoldDownWeekday = "sunday",
Nattraversal = "enable",
NegotiateTimeout = 30,
NetDevice = "enable",
PassiveMode = "disable",
Peertype = "any",
Psksecret = "NCIEW32930293203932",
Ppk = "disable",
Priority = 0,
Proposal = "aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1",
Reauth = "disable",
Rekey = "enable",
RemoteGw = "0.0.0.0",
RemoteGw6 = "::",
RsaSignatureFormat = "pkcs1",
SavePassword = "enable",
SendCertChain = "enable",
SignatureHashAlg = "sha2-512 sha2-384 sha2-256 sha1",
SuiteB = "disable",
TunnelSearch = "selectors",
Type = "dynamic",
UnitySupport = "enable",
WizardType = "dialup-forticlient",
Xauthtype = "auto",
});
// fortios_vpnipsec_phase2interface.trname1:
var trname3 = new Fortios.Vpn.Ipsec.Phase2interface("trname3", new()
{
AddRoute = "phase1",
AutoDiscoveryForwarder = "phase1",
AutoDiscoverySender = "phase1",
AutoNegotiate = "disable",
DhcpIpsec = "disable",
Dhgrp = "14 5",
DstAddrType = "subnet",
DstEndIp = "0.0.0.0",
DstEndIp6 = "::",
DstPort = 0,
DstStartIp = "0.0.0.0",
DstStartIp6 = "::",
DstSubnet = "0.0.0.0 0.0.0.0",
DstSubnet6 = "::/0",
Encapsulation = "tunnel-mode",
Keepalive = "disable",
KeylifeType = "seconds",
Keylifekbs = 5120,
Keylifeseconds = 43200,
L2tp = "disable",
Pfs = "enable",
Phase1name = trname4.Name,
Proposal = "aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm chacha20poly1305",
Protocol = 0,
Replay = "enable",
RouteOverlap = "use-new",
SingleSource = "disable",
SrcAddrType = "subnet",
SrcEndIp = "0.0.0.0",
SrcEndIp6 = "::",
SrcPort = 0,
SrcStartIp = "0.0.0.0",
SrcStartIp6 = "::",
SrcSubnet = "0.0.0.0 0.0.0.0",
SrcSubnet6 = "::/0",
});
var trname = new Fortios.Vpn.Ipsec.Forticlient("trname", new()
{
Phase2name = trname3.Name,
Realm = "1",
Status = "enable",
Usergroupname = "Guest-group",
});
});
package generated_program;
import com.pulumi.Context;
import com.pulumi.Pulumi;
import com.pulumi.core.Output;
import com.pulumi.fortios.vpn.Phase1interface;
import com.pulumi.fortios.vpn.Phase1interfaceArgs;
import com.pulumi.fortios.vpn.Phase2interface;
import com.pulumi.fortios.vpn.Phase2interfaceArgs;
import com.pulumi.fortios.vpn.Forticlient;
import com.pulumi.fortios.vpn.ForticlientArgs;
import java.util.List;
import java.util.ArrayList;
import java.util.Map;
import java.io.File;
import java.nio.file.Files;
import java.nio.file.Paths;
public class App {
public static void main(String[] args) {
Pulumi.run(App::stack);
}
public static void stack(Context ctx) {
// fortios_vpnipsec_phase1interface.trname2:
var trname4 = new Phase1interface("trname4", Phase1interfaceArgs.builder()
.acctVerify("disable")
.addGwRoute("disable")
.addRoute("enable")
.assignIp("enable")
.assignIpFrom("range")
.authmethod("psk")
.authusrgrp("Guest-group")
.autoDiscoveryForwarder("disable")
.autoDiscoveryPsk("disable")
.autoDiscoveryReceiver("disable")
.autoDiscoverySender("disable")
.autoNegotiate("enable")
.certIdValidation("enable")
.childlessIke("disable")
.clientAutoNegotiate("disable")
.clientKeepAlive("disable")
.comments("VPN: Dialup_IPsec (Created by VPN wizard)")
.defaultGw("0.0.0.0")
.defaultGwPriority(0)
.dhgrp("14 5")
.digitalSignatureAuth("disable")
.distance(15)
.dnsMode("auto")
.dpd("on-idle")
.dpdRetrycount(3)
.dpdRetryinterval("60")
.eap("disable")
.eapIdentity("use-id-payload")
.encapLocalGw4("0.0.0.0")
.encapLocalGw6("::")
.encapRemoteGw4("0.0.0.0")
.encapRemoteGw6("::")
.encapsulation("none")
.encapsulationAddress("ike")
.enforceUniqueId("disable")
.exchangeInterfaceIp("disable")
.exchangeIpAddr4("0.0.0.0")
.exchangeIpAddr6("::")
.forticlientEnforcement("disable")
.fragmentation("enable")
.fragmentationMtu(1200)
.groupAuthentication("disable")
.haSyncEspSeqno("enable")
.idleTimeout("disable")
.idleTimeoutinterval(15)
.ikeVersion("1")
.includeLocalLan("disable")
.interface_("port4")
.ipVersion("4")
.ipv4DnsServer1("0.0.0.0")
.ipv4DnsServer2("0.0.0.0")
.ipv4DnsServer3("0.0.0.0")
.ipv4EndIp("10.10.10.10")
.ipv4Netmask("255.255.255.192")
.ipv4SplitInclude("FIREWALL_AUTH_PORTAL_ADDRESS")
.ipv4StartIp("10.10.10.1")
.ipv4WinsServer1("0.0.0.0")
.ipv4WinsServer2("0.0.0.0")
.ipv6DnsServer1("::")
.ipv6DnsServer2("::")
.ipv6DnsServer3("::")
.ipv6EndIp("::")
.ipv6Prefix(128)
.ipv6StartIp("::")
.keepalive(10)
.keylife(86400)
.localGw("0.0.0.0")
.localGw6("::")
.localidType("auto")
.meshSelectorType("disable")
.mode("aggressive")
.modeCfg("enable")
.monitorHoldDownDelay(0)
.monitorHoldDownTime("00:00")
.monitorHoldDownType("immediate")
.monitorHoldDownWeekday("sunday")
.nattraversal("enable")
.negotiateTimeout(30)
.netDevice("enable")
.passiveMode("disable")
.peertype("any")
.psksecret("NCIEW32930293203932")
.ppk("disable")
.priority(0)
.proposal("aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1")
.reauth("disable")
.rekey("enable")
.remoteGw("0.0.0.0")
.remoteGw6("::")
.rsaSignatureFormat("pkcs1")
.savePassword("enable")
.sendCertChain("enable")
.signatureHashAlg("sha2-512 sha2-384 sha2-256 sha1")
.suiteB("disable")
.tunnelSearch("selectors")
.type("dynamic")
.unitySupport("enable")
.wizardType("dialup-forticlient")
.xauthtype("auto")
.build());
// fortios_vpnipsec_phase2interface.trname1:
var trname3 = new Phase2interface("trname3", Phase2interfaceArgs.builder()
.addRoute("phase1")
.autoDiscoveryForwarder("phase1")
.autoDiscoverySender("phase1")
.autoNegotiate("disable")
.dhcpIpsec("disable")
.dhgrp("14 5")
.dstAddrType("subnet")
.dstEndIp("0.0.0.0")
.dstEndIp6("::")
.dstPort(0)
.dstStartIp("0.0.0.0")
.dstStartIp6("::")
.dstSubnet("0.0.0.0 0.0.0.0")
.dstSubnet6("::/0")
.encapsulation("tunnel-mode")
.keepalive("disable")
.keylifeType("seconds")
.keylifekbs(5120)
.keylifeseconds(43200)
.l2tp("disable")
.pfs("enable")
.phase1name(trname4.name())
.proposal("aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm chacha20poly1305")
.protocol(0)
.replay("enable")
.routeOverlap("use-new")
.singleSource("disable")
.srcAddrType("subnet")
.srcEndIp("0.0.0.0")
.srcEndIp6("::")
.srcPort(0)
.srcStartIp("0.0.0.0")
.srcStartIp6("::")
.srcSubnet("0.0.0.0 0.0.0.0")
.srcSubnet6("::/0")
.build());
var trname = new Forticlient("trname", ForticlientArgs.builder()
.phase2name(trname3.name())
.realm("1")
.status("enable")
.usergroupname("Guest-group")
.build());
}
}
resources:
# fortios_vpnipsec_phase1interface.trname2:
trname4:
type: fortios:vpn/ipsec:Phase1interface
properties:
acctVerify: disable
addGwRoute: disable
addRoute: enable
assignIp: enable
assignIpFrom: range
authmethod: psk
authusrgrp: Guest-group
autoDiscoveryForwarder: disable
autoDiscoveryPsk: disable
autoDiscoveryReceiver: disable
autoDiscoverySender: disable
autoNegotiate: enable
certIdValidation: enable
childlessIke: disable
clientAutoNegotiate: disable
clientKeepAlive: disable
comments: 'VPN: Dialup_IPsec (Created by VPN wizard)'
defaultGw: 0.0.0.0
defaultGwPriority: 0
dhgrp: 14 5
digitalSignatureAuth: disable
distance: 15
dnsMode: auto
dpd: on-idle
dpdRetrycount: 3
dpdRetryinterval: '60'
eap: disable
eapIdentity: use-id-payload
encapLocalGw4: 0.0.0.0
encapLocalGw6: '::'
encapRemoteGw4: 0.0.0.0
encapRemoteGw6: '::'
encapsulation: none
encapsulationAddress: ike
enforceUniqueId: disable
exchangeInterfaceIp: disable
exchangeIpAddr4: 0.0.0.0
exchangeIpAddr6: '::'
forticlientEnforcement: disable
fragmentation: enable
fragmentationMtu: 1200
groupAuthentication: disable
haSyncEspSeqno: enable
idleTimeout: disable
idleTimeoutinterval: 15
ikeVersion: '1'
includeLocalLan: disable
interface: port4
ipVersion: '4'
ipv4DnsServer1: 0.0.0.0
ipv4DnsServer2: 0.0.0.0
ipv4DnsServer3: 0.0.0.0
ipv4EndIp: 10.10.10.10
ipv4Netmask: 255.255.255.192
ipv4SplitInclude: FIREWALL_AUTH_PORTAL_ADDRESS
ipv4StartIp: 10.10.10.1
ipv4WinsServer1: 0.0.0.0
ipv4WinsServer2: 0.0.0.0
ipv6DnsServer1: '::'
ipv6DnsServer2: '::'
ipv6DnsServer3: '::'
ipv6EndIp: '::'
ipv6Prefix: 128
ipv6StartIp: '::'
keepalive: 10
keylife: 86400
localGw: 0.0.0.0
localGw6: '::'
localidType: auto
meshSelectorType: disable
mode: aggressive
modeCfg: enable
monitorHoldDownDelay: 0
monitorHoldDownTime: 00:00
monitorHoldDownType: immediate
monitorHoldDownWeekday: sunday
nattraversal: enable
negotiateTimeout: 30
netDevice: enable
passiveMode: disable
peertype: any
psksecret: NCIEW32930293203932
ppk: disable
priority: 0
proposal: aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
reauth: disable
rekey: enable
remoteGw: 0.0.0.0
remoteGw6: '::'
rsaSignatureFormat: pkcs1
savePassword: enable
sendCertChain: enable
signatureHashAlg: sha2-512 sha2-384 sha2-256 sha1
suiteB: disable
tunnelSearch: selectors
type: dynamic
unitySupport: enable
wizardType: dialup-forticlient
xauthtype: auto
# fortios_vpnipsec_phase2interface.trname1:
trname3:
type: fortios:vpn/ipsec:Phase2interface
properties:
addRoute: phase1
autoDiscoveryForwarder: phase1
autoDiscoverySender: phase1
autoNegotiate: disable
dhcpIpsec: disable
dhgrp: 14 5
dstAddrType: subnet
dstEndIp: 0.0.0.0
dstEndIp6: '::'
dstPort: 0
dstStartIp: 0.0.0.0
dstStartIp6: '::'
dstSubnet: 0.0.0.0 0.0.0.0
dstSubnet6: ::/0
encapsulation: tunnel-mode
keepalive: disable
keylifeType: seconds
keylifekbs: 5120
keylifeseconds: 43200
l2tp: disable
pfs: enable
phase1name: ${trname4.name}
proposal: aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm chacha20poly1305
protocol: 0
replay: enable
routeOverlap: use-new
singleSource: disable
srcAddrType: subnet
srcEndIp: 0.0.0.0
srcEndIp6: '::'
srcPort: 0
srcStartIp: 0.0.0.0
srcStartIp6: '::'
srcSubnet: 0.0.0.0 0.0.0.0
srcSubnet6: ::/0
trname:
type: fortios:vpn/ipsec:Forticlient
properties:
phase2name: ${trname3.name}
realm: '1'
status: enable
usergroupname: Guest-group
Create Forticlient Resource
Resources are created with functions called constructors. To learn more about declaring and configuring resources, see Resources.
Constructor syntax
new Forticlient(name: string, args: ForticlientArgs, opts?: CustomResourceOptions);
@overload
def Forticlient(resource_name: str,
args: ForticlientArgs,
opts: Optional[ResourceOptions] = None)
@overload
def Forticlient(resource_name: str,
opts: Optional[ResourceOptions] = None,
phase2name: Optional[str] = None,
usergroupname: Optional[str] = None,
realm: Optional[str] = None,
status: Optional[str] = None,
vdomparam: Optional[str] = None)
func NewForticlient(ctx *Context, name string, args ForticlientArgs, opts ...ResourceOption) (*Forticlient, error)
public Forticlient(string name, ForticlientArgs args, CustomResourceOptions? opts = null)
public Forticlient(String name, ForticlientArgs args)
public Forticlient(String name, ForticlientArgs args, CustomResourceOptions options)
type: fortios:vpn/ipsec/forticlient:Forticlient
properties: # The arguments to resource properties.
options: # Bag of options to control resource's behavior.
Parameters
- name string
- The unique name of the resource.
- args ForticlientArgs
- The arguments to resource properties.
- opts CustomResourceOptions
- Bag of options to control resource's behavior.
- resource_name str
- The unique name of the resource.
- args ForticlientArgs
- The arguments to resource properties.
- opts ResourceOptions
- Bag of options to control resource's behavior.
- ctx Context
- Context object for the current deployment.
- name string
- The unique name of the resource.
- args ForticlientArgs
- The arguments to resource properties.
- opts ResourceOption
- Bag of options to control resource's behavior.
- name string
- The unique name of the resource.
- args ForticlientArgs
- The arguments to resource properties.
- opts CustomResourceOptions
- Bag of options to control resource's behavior.
- name String
- The unique name of the resource.
- args ForticlientArgs
- The arguments to resource properties.
- options CustomResourceOptions
- Bag of options to control resource's behavior.
Forticlient Resource Properties
To learn more about resource properties and how to use them, see Inputs and Outputs in the Architecture and Concepts docs.
Inputs
The Forticlient resource accepts the following input properties:
- Phase2name string
- Phase 2 tunnel name that you defined in the FortiClient dialup configuration.
- Usergroupname string
- User group name for FortiClient users.
- Realm string
- FortiClient realm name.
- Status string
- Enable/disable this FortiClient configuration. Valid values:
enable
,disable
. - Vdomparam string
- Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
- Phase2name string
- Phase 2 tunnel name that you defined in the FortiClient dialup configuration.
- Usergroupname string
- User group name for FortiClient users.
- Realm string
- FortiClient realm name.
- Status string
- Enable/disable this FortiClient configuration. Valid values:
enable
,disable
. - Vdomparam string
- Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
- phase2name String
- Phase 2 tunnel name that you defined in the FortiClient dialup configuration.
- usergroupname String
- User group name for FortiClient users.
- realm String
- FortiClient realm name.
- status String
- Enable/disable this FortiClient configuration. Valid values:
enable
,disable
. - vdomparam String
- Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
- phase2name string
- Phase 2 tunnel name that you defined in the FortiClient dialup configuration.
- usergroupname string
- User group name for FortiClient users.
- realm string
- FortiClient realm name.
- status string
- Enable/disable this FortiClient configuration. Valid values:
enable
,disable
. - vdomparam string
- Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
- phase2name str
- Phase 2 tunnel name that you defined in the FortiClient dialup configuration.
- usergroupname str
- User group name for FortiClient users.
- realm str
- FortiClient realm name.
- status str
- Enable/disable this FortiClient configuration. Valid values:
enable
,disable
. - vdomparam str
- Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
- phase2name String
- Phase 2 tunnel name that you defined in the FortiClient dialup configuration.
- usergroupname String
- User group name for FortiClient users.
- realm String
- FortiClient realm name.
- status String
- Enable/disable this FortiClient configuration. Valid values:
enable
,disable
. - vdomparam String
- Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
Outputs
All input properties are implicitly available as output properties. Additionally, the Forticlient resource produces the following output properties:
- Id string
- The provider-assigned unique ID for this managed resource.
- Id string
- The provider-assigned unique ID for this managed resource.
- id String
- The provider-assigned unique ID for this managed resource.
- id string
- The provider-assigned unique ID for this managed resource.
- id str
- The provider-assigned unique ID for this managed resource.
- id String
- The provider-assigned unique ID for this managed resource.
Look up Existing Forticlient Resource
Get an existing Forticlient resource’s state with the given name, ID, and optional extra properties used to qualify the lookup.
public static get(name: string, id: Input<ID>, state?: ForticlientState, opts?: CustomResourceOptions): Forticlient
@staticmethod
def get(resource_name: str,
id: str,
opts: Optional[ResourceOptions] = None,
phase2name: Optional[str] = None,
realm: Optional[str] = None,
status: Optional[str] = None,
usergroupname: Optional[str] = None,
vdomparam: Optional[str] = None) -> Forticlient
func GetForticlient(ctx *Context, name string, id IDInput, state *ForticlientState, opts ...ResourceOption) (*Forticlient, error)
public static Forticlient Get(string name, Input<string> id, ForticlientState? state, CustomResourceOptions? opts = null)
public static Forticlient get(String name, Output<String> id, ForticlientState state, CustomResourceOptions options)
Resource lookup is not supported in YAML
- name
- The unique name of the resulting resource.
- id
- The unique provider ID of the resource to lookup.
- state
- Any extra arguments used during the lookup.
- opts
- A bag of options that control this resource's behavior.
- resource_name
- The unique name of the resulting resource.
- id
- The unique provider ID of the resource to lookup.
- name
- The unique name of the resulting resource.
- id
- The unique provider ID of the resource to lookup.
- state
- Any extra arguments used during the lookup.
- opts
- A bag of options that control this resource's behavior.
- name
- The unique name of the resulting resource.
- id
- The unique provider ID of the resource to lookup.
- state
- Any extra arguments used during the lookup.
- opts
- A bag of options that control this resource's behavior.
- name
- The unique name of the resulting resource.
- id
- The unique provider ID of the resource to lookup.
- state
- Any extra arguments used during the lookup.
- opts
- A bag of options that control this resource's behavior.
- Phase2name string
- Phase 2 tunnel name that you defined in the FortiClient dialup configuration.
- Realm string
- FortiClient realm name.
- Status string
- Enable/disable this FortiClient configuration. Valid values:
enable
,disable
. - Usergroupname string
- User group name for FortiClient users.
- Vdomparam string
- Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
- Phase2name string
- Phase 2 tunnel name that you defined in the FortiClient dialup configuration.
- Realm string
- FortiClient realm name.
- Status string
- Enable/disable this FortiClient configuration. Valid values:
enable
,disable
. - Usergroupname string
- User group name for FortiClient users.
- Vdomparam string
- Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
- phase2name String
- Phase 2 tunnel name that you defined in the FortiClient dialup configuration.
- realm String
- FortiClient realm name.
- status String
- Enable/disable this FortiClient configuration. Valid values:
enable
,disable
. - usergroupname String
- User group name for FortiClient users.
- vdomparam String
- Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
- phase2name string
- Phase 2 tunnel name that you defined in the FortiClient dialup configuration.
- realm string
- FortiClient realm name.
- status string
- Enable/disable this FortiClient configuration. Valid values:
enable
,disable
. - usergroupname string
- User group name for FortiClient users.
- vdomparam string
- Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
- phase2name str
- Phase 2 tunnel name that you defined in the FortiClient dialup configuration.
- realm str
- FortiClient realm name.
- status str
- Enable/disable this FortiClient configuration. Valid values:
enable
,disable
. - usergroupname str
- User group name for FortiClient users.
- vdomparam str
- Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
- phase2name String
- Phase 2 tunnel name that you defined in the FortiClient dialup configuration.
- realm String
- FortiClient realm name.
- status String
- Enable/disable this FortiClient configuration. Valid values:
enable
,disable
. - usergroupname String
- User group name for FortiClient users.
- vdomparam String
- Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
Import
VpnIpsec Forticlient can be imported using any of these accepted formats:
$ pulumi import fortios:vpn/ipsec/forticlient:Forticlient labelname {{realm}}
If you do not want to import arguments of block:
$ export “FORTIOS_IMPORT_TABLE”=“false”
$ pulumi import fortios:vpn/ipsec/forticlient:Forticlient labelname {{realm}}
$ unset “FORTIOS_IMPORT_TABLE”
To learn more about importing existing cloud resources, see Importing resources.
Package Details
- Repository
- fortios pulumiverse/pulumi-fortios
- License
- Apache-2.0
- Notes
- This Pulumi package is based on the
fortios
Terraform Provider.